To Change Temperature Display | Frigidaire Air Conditioner specs

Operating Instructions

(continued)

FAULT CODES:

	temp/Umer		temp/timer
auto		auto
[] hi		[] hi
med		reed
to		lo
[] heat		[] heat
cool		cool
energy saver	rem({te	energy saver	remote
energy saver	sensmg	energy saver	sensmg
fan only	sensmg	fan only	sensmg
fan only		fan only

If the display		reads "HS", a sensor has	If the display		reads	"AS", a sensor has
failed,	Contact	your Authorized Frigidaire	failed,	Contact	your	Authorized Frigidaire
Service	Center,		Service	Center,

TO CHANGE TEMPERATURE DISPLAY:

temp/timer

DO THIS:

PRESSAND HOLD THE

UP/DOWN BUTTONS

TOGETHER FOR 3 SECONDS

_emp/timer

auto

[] hi

med

	[] heat
	cool
	energy saver	rem£te
	energy saver	sensmg
		sensmg

#n only

If the display reads "ES", a sensor has failed. Contact your Authorized Frigidaire Service Center.

YOU WILL SEE:

temp/drner

Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.

TO TURN UNIT OFF:

YOU WILL SEE:

temp/dmer

DO THIS:

PRESS

ON/OFF BUTTON

temp/timer

rem£te

sensmg

Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.

This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue					/_
[] The "Cool" circuit has an automatic	3 minute time	delayed start	if the unit is turned off	and on quickly.	/_
to run during this time.
. There is a 2-Second delay for the compressor	shutting down	when selecting	FAN ONLY/HEAT. This	is to cover the	possibility of
having to roll through to select another mode.

•The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), 55F and 80F degrees (in heat mode).

•After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.

@2009 Electrolux Home Products, Inc.