Mitsubishi Electronics MSZ-FD25VAS, MSZ-FD35VAS service manual Daytime

●Indoor unit installation location and air-conditioning area

Installed at left		Installed at center		Installed at right
LEFT	RIGHT	LEFT	RIGHT	LEFT	RIGHT

·Be sure to set the slide switch inside the remote controller to an appropriate position in accordance with the installed position of the indoor unit. If the switch is not set correctly, the air conditioner may not function properly.

(Refer to "Remote controller in SERVICE FUNCTIONS".)

	To air-condition mainly	To air-condition the entire room	To air-condition mainly
	the left area of the room	The horizontal air flow direction and in-	the right area of the room
		door unit display are switched accord-
		ing to the room temperature (floor/wall).
Remote controller button	Press AREA button	Press AREA button to select AUTO.	Press AREA button
	to select LEFT.		to select RIGHT.
Remote controller display

i-see Sensor operation

Control range

Installed

of horizontal air at center

flow direction.

The vertical air

flow direction

Installed

conforms to the at left

setting on the

remote controller.

(The horizontal

air flow direction Installed

is controlled in

at right

this range.)

Indoor unit

AREA

L

R

L

R

or

L

R

or

L

R

L

R

display

Lighted Not lighted

●When AREA is set to AUTO

•The vertical vane is controlled to maintain uniform temperature in the whole room.

•The i-see Sensor moves in a range of 150 degrees detecting floor/wall temperature of 3 areas (left, right, center). Therefore, the detected temperatures may be different from the temperatures measured on commercial thermometers depending on the condition or temperature distribution on the floor and/or wall.

Ex.) In COOL mode Approx. 150 degrees

Moving of horizontal air flow direction

Daytime

Warm area

Nighttime

Cold area

display

Indoor unit NOTE

The indoor unit delivers cold air detecting the warm area in the room.

Indication of AREA setting
L AREA R	L AREA R

·The horizontal air flow direction changes if i-see Sensor detects approx. 3 : temperature difference.

·In AUTO of AREA setting, both right and left lamps are lighted when the room is evenly air-conditioned.

L AREA R

Lighted

Not lighted

16