blender jar lid or use any utensils to distribute the foods. Do not take off the jug from the base during operation.
–The consistency of the mixture is liable to change as ingredients are added; it may be necessary to increase or decrease the speed accordingly.
–Only process max. 12 to 14 standard ice cubes at a time. Use a spatula occasionally to stir ONLY WHEN the main blender is switched off.
–Cool hot foods to max. 80°C / 176°F before blending and start mixing at and gradually increase to higher speed.
–When mixing at higher speeds (, ), with full jar or with hot foods, stop the blender before removing the lid cap to add ingredients.
–Only process max.
–Boiling Liquid or solid frozen foods (except for ice cubes) should not be placed in the blender jar.
–Always let the blender jar cool down which has come directly from a hot dishwasher before placing ice, frozen foods or very cold liquids.
IMPORTANT:
To prevent overheating of the motor, switch off the blender after 2 minutes of continuous operation and wait 5 minutes before continuing. After 5 Cycles of operation, wait 15 minutes before continuing.
–Place the ingredients in the blender jar (3). Only fill up to 1.25l/40oz (1.0l/34oz for frothing and hot liquids).
–Place the lid (2) onto the blender jar so the spout is covered
(A: CLOSE () should align with spout) and push it down firmly. Place the lid cap (1) into the opening in the lid. Turn on the main power switch (10) on the back of the housing. The indication light lights up. The
–Select a speed by turning the speed control (5).
–Press the
–In , or speeds, you can remove the lid cap (1) care- fully to add liquids or ice cubes. Make sure the content cannot spill out before you remove the lid cap. When
operating with full pitcher or hot liquids at high speeds (, ), stop the blender before removing the lid cap to add ingredients. If blending hot foods or liquids, remove the lid cap and operate only on speed.
–Press the
–If you prefer to use the
Instruction for use
5