Viking VEDO5302TBU, VESO5302TAR, VESO5302TSS manual Lock and Unlock, Interior Oven Lights TwoPads

“Amy’s Oatmeal Cookies”

Programming Modes

Oven Settings

Lock and Unlock

This feature prevents the controlpads from being activated while the ovens are not being used.

Tolock the ovens:

1.Press on the right side of your oven control panel. Display shows “HOLD FOR LOCK.”

2.When locked, threeshort beeps will sound and the display will show “PANEL IS LOCKED.”

3.Tounlock a double oven, pressand hold “UPPER OVEN” or “LOWER OVEN” for 3 seconds. When unlocked,two short beeps will sound and the displaywill show “PANEL IS

UNLOCKED.”

4. Tounlock a single oven, pressand hold the

and simultaneously press and hold the “OVENON” button for 3 seconds. When unlocked, two short beeps will sound and the display will show “PANEL IS UNLOCKED”.

Interior Oven Lights (TwoPads)

Each oven has an interiorlight that can be turnedoff and on using the designatedbuttonson the oven controlpanel.

Press or to turn on the light in the upper or lower oven. (Youwill hear a beep to signal that the light is on.)

Press or again to turn off the light in the upper or lower oven. (Youwill hear two beeps to signalthat the light is off.)

Recipe Function(Premiere Model Only)

Entering Recipe Name This function programs and saves up to 100 cooking cycles from favorite recipes. Recipe names are entered on

the numeric keypad on the right side of the keyboard.

When a key with several letters is pressed for the first time, the first letter is entered. If the same key is pressed a second time, the second letter is entered, and so on. For example, if the key “2 ABC” is pressed once, the letter ‘A’ is entered. If the key is pressed 2 times, the letter ‘B’ is entered. If the key is pressed 3 times, the letter ‘C’ is entered. If the key is pressed 4 times, the digit ‘2’ is entered. Then lower case ‘a’, then ‘b’, then ‘c’, then ‘A’ again, and so on.

If nothing is pressed within 2 seconds, the cursor moves to the next position. To return to the previous position use the right “CLEAR” key. Pressing the ‘1’ key will also move the cursor to the next position as well as entering a space.

When subsequent characters are entered, the case and type of the character matches the previous character. For example, if the previous character is a digit, then pressing the “2 ABC” key once would result in the digit ‘2’. If the previous character is a lower case letter, then pressing the “2 ABC” key once would result in the letter ‘a’.

Programming Modes

26 27