Viking VESO5302TSS, VEDO530 During Auto Roast Preheat, When Set Auto Roast Temperature Is Reached

Page 19

Roast Modes

Meat Probe(Available on Premiere Models)

Auto Roast

Use this function to simplify roasting by automaticallysearing the outside of roasts. Touse Auto Roast:

1. Arrange the oven racks in the desired positionsbefore heating

the oven.

2. Select “UPPER OVEN” or “LOWER OVEN.”

3. Set the Oven FunctionSelectorto “AUTO ROAST”.

Temperature display flashesa preset temperature of 325º F.

The meat probe takes the guesswork out of roasting by cooking foods to the ideal internal temperature. The probe setting is used to automatically turn the oven off when meat reaches its optimal internal temperature. Your Viking oven’s built-in probe will help you prepare meats exactly as you want them.

Cable Probe

Handles

Plug

Programming Modes

4. Set the temperatureusing one of the followingtwo methods:

a.Confirm preset temperature,press “SET” or “ENTER.” The oven will begin TruConvec™Preheat immediately.

OR

b.Change the temperatureby typingthe desired temperature on the numerickeypador using the up and down arrowkeys. Press“SET” or “ENTER” when finished. The oven will begin TruConvec™Preheat immediately.

During Auto Roast Preheat

The display will alternatebetweenshowingthe set roasting temperatureand the actualpreheattemperatureevery 5 seconds.

When Set Auto Roast Temperature Is Reached

One long beep will sound and the displaywill show “SEARING.” The oven will remainat searingtemperature (set temperature plus 100º F) for 30 minutes. If set, the Cook Time timer will begin.

ToTurn Off Oven:

Press the “OFF” buttonon the control panel displayfor the oven you are using. One beep will sound and the oven will turn off.

Meat Probe Use and Care

•Use of probes other than the one provided with your oven may result in damage to the probe.

•Use the handles of the probe and plug when inserting and removing them from the meat and outlet.

•Toavoid damaging your probe, never use tongs to pull on the cable when removing.

•Toavoid breaking the probe, make sure food is completely defrosted before inserting.

•Toprevent possible burns, do not unplug the probe from the outlet until the oven has cooled.

•Never leave the probe inside the oven during a self-cleaning cycle.

•Never store the probe inside the oven.

To Insert the Meat Probe:

After preparing the meat and placing it on the broiler pan, follow these steps for proper probe placement:

1.Lay the probe on the outside of the meat along the top or side and use your finger to mark where the edge of the meat meets the probe. The point where they meet should rest in the center of the thickest, meatiest part of the roast.

2.Insert the probe completely into the meat. It should not touch the bone, fat, or gristle.

•For roasts with no bone, insert the probe into the meatiest part of the roast.

•For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint.

•With a whole turkey,insert the probe into the meatiest part of the inner thigh from below and parallel to the leg.

Programming Modes

36

37

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Viking Use & Care Manual Congratulations Table of Contents Important Safety Instructions Oven Control Panel Oven Function Selector Control Built-In Electric Oven FeaturesTemperature Control Electronic Keypad EntryTruConvec Touch Pad FunctionsInterior Oven Light Controls Setting the Timer Clocks and TimersTimer Alarm Setting the ClockToSet Cook Time Use the up and down arrowsto set the timerTo Set Stop Time Tones Oven SettingsBrightness Degree FormatTimeouts Tone VolumeTone Name Number Duration of Tones Sabbath ModeShowroom Mode Clock FormatInterior Oven Lights TwoPads Lock and UnlockTounlock a single oven, pressand hold Warming Modes During Convection Bake Preheat Set the temperature using one of the following two methodsBake Modes During Bake PreheatBroil Modes During Convection Roast Preheat Roast ModesConvectionBroil To Use Convection BroilMeat Probe Use and Care When Set Auto Roast Temperature Is ReachedDuring Auto Roast Preheat ToTurn Off OvenTo Set the Meat Probe Function Cooking TipsRack Positions Preheat PreheatBaking Tips Pan PlacementTipsMultiple Rack Baking Temp Time Conventional Baking ChartConvection Baking Chart Food Pan SizeToprevent sticking, lightly grease broiler tray Solving BakingProblemsBroiling Tips Tokeep meat from curling, slit fatty edgesType Time Cut of Meat Weight Setting Broiling ChartRoasting Tips ConvectionRoasting Chart Conventional Roasting ChartTime Internal Food Weight Temp General Cleaning Cleaning and MaintenanceGrid Press Self Clean from the oven function control panel Cleaning the Interior OvenBefore Using the Self-Clean Cycle Using the Self-Clean CycleReplacing Light Trouble ShootingError Handling Error Message Problem CorrectionWarranty Service InformationWarranty

VESO5302TSS, VEDO5302TSS, VEDO530, VESO530, VEDO5302TBU specifications

Viking, a renowned brand in the heating and cooling industry, presents an impressive range of wall-mounted electric heaters, including models like the VESO5302TAR, VEDO5302TBU, VESO530, VEDO530, and VEDO5302TSS. These heaters are designed to provide efficient and effective heating solutions for both residential and commercial spaces, ensuring comfort during colder months.

The VESO5302TAR model features advanced heating technology that utilizes a robust ceramic element, delivering quick and efficient heat. Its sleek design allows it to blend seamlessly with any décor while the integrated thermostat ensures that your desired temperature is maintained consistently. With energy-efficient operation, this model is designed to help save on heating costs, making it a popular choice for eco-conscious consumers.

The VEDO5302TBU model stands out with its user-friendly interface and digital control panel. This heater offers programmable settings, allowing users to create customized heating schedules tailored to their daily routines. Additionally, it features a built-in timer, ensuring that the unit operates only when needed. The compact design and lightweight construction make it easy to install in various settings, from homes to small offices.

Notably, the VESO530 and VEDO530 models are characterized by their powerful heating performance, providing significant heat output while remaining whisper-quiet. These models are equipped with safety features such as overheat protection and tip-over switch, enhancing their reliability and ensuring peace of mind when in use. The durable construction of these units ensures longevity, making them a worthwhile investment.

Finally, the VEDO5302TSS model reflects Viking's commitment to innovation with its stainless steel housing, offering exceptional durability and contemporary aesthetics. This model is particularly suited for high-moisture environments, such as bathrooms or kitchens, thanks to its corrosion-resistant design. Furthermore, all models within this series come with energy-efficient ratings that align with modern sustainability practices.

In summary, the Viking VESO5302TAR, VEDO5302TBU, VESO530, VEDO530, and VEDO5302TSS electric heaters are remarkable products that combine innovative technologies, user-friendly features, and safety protocols. Whether for residential or commercial applications, these models provide reliable heating solutions that cater to diverse needs while promoting energy efficiency and comfort.
Top Page Image Contents