Cordless Hand Blender (stick blender)
To detach the stainless steel blending shaft
Ensure the Cordless Hand Blender is switched off by keeping hands clear of the Power button and Speed button. Unscrew the blending shaft from the motor body in a clockwise direction (See Fig. 1).
Fig 1
To attach the stainless steel blending shaft
Hold the shaft with the blades down, and align the top end of the blending shaft with the corresponding end of the motor body. Screw the shaft into the motor body in an
To use the stick blender
Ensure the stick blender is completely and properly assembled as detailed on the left.
1.Place food to be processed into the mixing jug provided (or a sufficiently large mixing bowl or saucepan). The mixing jug provided should only be filled up to the 'LIQUID MAX' mark when blending liquids.
2.Place the blending shaft as deeply as possible into the mixing jug and depress the Power button (top button) to turn the Cordless Hand Blender on. While still depressing the Power button, depress the Speed button (bottom button). To select the desired speed, the Speed button should be lightly depressed for low speed and firmly depressed for high speed. Both the Power button and the Speed button must be depressed simultaneously for the required duration of operation (see Fig. 2).
Fig 2
Power button
Speed button
3.Work through the ingredients in the mixing jug with a gentle raising and lowering motion.
4.Switch off the Cordless Hand Blender motor by releasing the Power and Speed buttons.
5.Ensure the motor has completely stopped before lifting the Cordless Hand Blender out of the mixing jug.
Recommendations when using the Cordless Hand Blender as a stick blender:
•The Cordless Hand Blender blends foods and liquids rapidly, therefore it is easy to
•The stainless steel blending shaft on the Cordless Hand Blender allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy. For safety reasons, remove the saucepan away from the heat source before processing. Ensure the Cordless Hand Blender is kept away from any heat source.
•When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.
•Warm all liquids to be added to soups and purees, this will ensure even blending.
•Use the storage lid of the mixing jug as a non slip base for the jug during blending. This will keep the jug stable.
•Do not operate the appliance continuously for more than 60 seconds. Allow the motor to rest for 1 minute between each use.
If food becomes lodged around the blade or in the blade guard, follow these safety instructions:
1.Switch the Cordless Hand Blender off by releasing the Power and Speed buttons.
2.Remove the blending shaft from the motor body.
3.Use a spatula to carefully dislodge the food. Do not use fingers as the blades are sharp.
4.After the food has been removed and the blades are clear,
THE STAINLESS STEEL ICE CRUSHING BLADES ON THE BLENDING SHAFT ARE EXTREMELY SHARP, KEEP FINGERS AWAY FROM THE BLADES AT ALL TIMES.
10 | 11 |