Cordless Hand Blender (smoothie attachment)
Cordless Hand Blender (chopper bowl attachment)
To detach the smoothie attachment
Ensure the Cordless Hand Blender is switched off by keeping hands clear of the Power button and Speed button. Unscrew the smoothie attachment from the motor body in a clockwise direction (See Fig. 1).
Fig 1
To attach the smoothie attachment
Hold the shaft with aerating blades down, and align the top end of the smoothie attachment with the corresponding end of the motor body. Screw the shaft into the motor body in an
To use the smoothie attachment
Ensure the smoothie attachment is completely and properly assembled as detailed on the left.
1.Place food to be processed into the mixing jug provided (or a sufficiently large mixing bowl or saucepan). The mixing jug provided should only be filled up to the 'LIQUID MAX' mark when blending liquids.
2.Place the smoothie attachment as deeply as possible into the mixing jug and depress the Power button (top button) to turn the Cordless Hand Blender on. While still depressing the Power button, depress the Speed button (bottom button). To select the desired speed, the Speed button should be lightly depressed for low speed and firmly depressed for high speed. Both the Power button and the Speed button must be depressed simultaneously for the required duration of operation (see Fig. 2).
Fig 2
Power button
Speed button
3.Work through the ingredients in the mixing jug with a gentle raising and lowering motion.
4.Switch off the Cordless Hand Blender by releasing the Power and Speed buttons.
5.Ensure the motor has completely stopped before lifting the Cordless Hand Blender out of the mixing jug.
To detach the chopper attachment
•Remove the motor from the chopper lid.
To attach the chopping blade, chopping bowl and lid
•Place the food inside the chopper bowl. Do not exceed the max marking.
•Ensure the chopper bowl lid is dry with no water left inside before reattaching.
Always place the chopping blade on its pivot pin on the bottom of the bowl before placing any contents into the bowl. Do not lift the blade before the complete chopping operation is finished.
Note
To use the chopper bowl
Ensure the chopper is completely and properly assembled as detailed on this page.
1.Depress the Power button (top button) to turn the Cordless on. While depressing the Power button, depress the Speed button (bottom button).
To select the desired speed, the Speed button should be lightly depressed for low speed and firmly depressed for high speed. Both the Power button and the Speed button must be depressed simultaneously for the required duration of operation.
2.When processing has finished, switch off the Cordless Hand Blender by releasing the Power and Speed buttons.
3.Ensure the motor has completely stopped before removing the motor body from the lid of the chopper bowl.
Recommendations when using the Cordless Hand Blender with Chopper Bowl
•Do not operate your Cordless Hand Blender when the chopper bowl is empty.
•During processing, hold the motor body with one hand and chopper bowl and lid with the other.
•When processing, cut food into uniform sizes to ensure quicker, even and more consistent results.
•DO NOT process hard foods such as coffee, cereals or chocolate in lumps and this may result in damage to the blade.
•DO NOT process boiling or hot foods in the chopper bowl.
•NEVER remove the blade from the bowl before the processing is completed.
•The Cordless Hand Blender blends food and liquids rapidly, therefore it is easy to over process. Remember to check food throughout the operation.
12 | 13 |