Breville BCS600XL Operating your Breville Cordless Hand Blender, Operating time, Charging base

Page 5

Operating your Breville Cordless Hand Blender continued

Overload and low voltage protection

The Cordless Hand Blender is fitted with an automatic cut-out that will operate if the appliance is overloaded. This is to protect the motor and battery from excessive heat build up. The cut-out is only momentary, and the appliance can then be re-started. If this automatic cut-out occurs, reduce the volume of food being mixed and process in smaller amounts.

The Cordless Hand Blender is fitted with a second automatic cut-out that operates when the battery starts to become flat. This protection is necessary because applying high loads to flat rechargeable cells reduces their life. If your appliance cuts out without being overloaded, return it to the charging base until sufficiently recharged.

Operating time

The actual operating time of the appliance will vary significantly with the types and quantities of food being processed, but is typically over 10 minutes with a new, fully charged battery under average conditions.

Battery charging procedures

1.

Plug the charger plug attached to the charging

 

base into a 110/120 volt power outlet.

2.

Place the Cordless Hand Blender motor body into

 

the charging base, making sure that it firmly sits

 

in the charging base and the red charging light

 

illuminates. Your Cordless Hand Blender will

 

begin charging. When the battery is fully charged

Fig 1

Charging base

The charging base recharges the Cordless Hand Blender and stores the smoothie attachment and excess cord from the charging base (see Fig. 1). The charging base can be mounted on the wall (see Fig.

2)or placed on a horizontal surface such as a counter or shelf.

Fig 2

The Cordless Hand Blender is equipped with a compact charger plug. It takes up a minimum of space around the power cord. When plugged in, the charger plug will always remain warm, even after the charge light changes from red to green.

The charging base stores the excess cord from the charging base. Simply pull the excessive cord until the desired length is achieved. The excess cord can be wrapped inside the cavity under the charging base.

If you choose to wall mount the charging base, please follow these steps:

1.Select a convenient position within 3ft (1m) of an electrical outlet. If the charging base is to be mounted closer to an outlet, wrap any excess cord in the cavity under the charging base.

2.Place the wall mount against the wall in the desired position to mark the drill holes for the screws (see Fig. 3).

Fig 3

X

XMark drill holes here

The Cordless Hand Blender features a unique safety switch to ensure the appliance does not operate accidentally. To activate the Cordless Hand Blender, follow the sequence below:

1.Depress the Power button for 1 second

Fig 4

2. Continue holding the Power button

, then

depress the Speed button .

 

Fig 5

 

3.To select the desired speed:

I. For low speed, lightly depress the Speed button II. For high speed, firmly depress the Speed button

the charging light will change to green.

3. To maintain the charge in the motor body, keep

the charging base plugged into a standard power

outlet. When charging, the charger plug may be

warm to the touch – this is normal. It is

impossible to overcharge the battery because the

Cordless Hand Blender is designed with

overcharge protection circuitry.

3.Drill a 0.2inch (5mm) diameter hole through the center of each drill hole mark. Push a plastic wall anchor into each drilled hole.

4.Insert a screw into each drilled hole and turn until the screw heads are 0.1inch (3mm) above the wall surface.

5.Slide the wall mount onto the screws and attach the charging base to the wall mount.

Ensure the Power button is depressed first.

Ensure the Power button has been depressed for 1 second before depressing the Speed button.

Ensure both the Power button

and Speed

button are depressed together.

 

Note

8

9

Image 5
Contents Anglo Canadian 2555, de l’Aviation Cordless Hand BlenderCongratulations ContentsBreville recommends safety first Know your Breville Cordless Hand Blender Charging the battery before first useBefore first use For use as a mini chopper or food processor. Item not shownOperating your Breville Cordless Hand Blender Battery charging proceduresOverload and low voltage protection Operating timeTo detach the stainless steel blending shaft Cordless Hand Blender stick blenderTo attach the stainless steel blending shaft To use the stick blenderTo attach the smoothie attachment To detach the smoothie attachmentTo use the smoothie attachment To detach the chopper attachmentCare, cleaning and storage Warranty Recipes RecipesSoups Sauces Sauces Drinks Cocktails Fruit Cocktail Non-Alcoholic Drinks Desserts / Baby foodRockmelon and pineapple frappe Crepe batterMélangeur portatif sans fil Table des matières Breville vous recommande la sécurité avant toutBreville vous recommande la sécurité avant tout Pour fouetter et aérer Avant la première utilisationPlat Socle de chargement Protection contre la surcharge et la basse tensionDurée de fonctionnement Utilisation de l’accessoire de mélange Retrait de l’accessoire de mélange en acier inoxydableInstallation de l’accessoire de mélange en acier inoxydable Installation du fouet à Retrait de l’accessoire pour hacherUtilisation du fouet à boissons fouettées Utilisation du bol pour hacherEntretien, nettoyage et rangement Garantie Recettes Potage à la citrouille et à la patate douce PotagesPotage méditérannéen Potage aux carottes et à l’orangePotage doux à la noix de coco et aux épinards Potages SaucesTrempette aux tomates et au poivre de Cayenne Béchamel de baseSauces suite Lait fouetté BoissonsBanane glacée Boisson au soya, à la banane et à la fraiseBoissons suite Cocktails Cocktail aux fruits Boissons non alcoolisées Desserts et aliments pour bébéBoisson frappée au cantaloup et à l’ananas Mélange à crêpesPO Box 47170 Gardena Centrode Servicio de Atencion al Clitente BrevilleFelicitaciones Breville recomienda que la seguridad es primero Cargar la batería antes del primer uso Acerca de su Cordless Hand BlenderAntes del primer uso Botón Speed Tiempo de funcionamientoBase de carga Conectar la varilla para mezclar de acero inoxidable Desprender la varilla para mezclar de acero inoxidableUsar la batidora de varilla Hand BlenderDesprender el accesorio para picar alimentos Conectar el accesorio para batidosUsar el accesorio para batidos Cuidado, limpieza y almacenamiento Garantía Página RecetasSopa de calabaza y kumara SopasMediterránea Sopa de zanahoria y naranjaSopa de espinaca y coco SalsasSalsa para untar de pimiento rojo y tomate Salsa bechamel básicaSalsa de eneldo y salmón ahumado Salsa picante de tomate y tocinoMayonesa básica Salsa tártara picanteBebidas Bebidas Cócteles Cóctel de frutas Bebidas sin alcohol Postres y alimento para bebésFrappé de melón cantalupo y piña Pasta para rebosar crep

BCS600XL specifications

The Breville BCS600XL is a standout appliance in the world of countertop cooking, primarily designed for anyone who appreciates the convenience and quality of slow cooking, steaming, and sautéing. This versatile multi-cooker offers a range of features that cater to various cooking styles, making it a great addition to any kitchen.

One of the BCS600XL's main features is its slow cooker capability. The appliance includes programmable settings that allow users to select cooking times ranging from two to ten hours. This feature makes it easy to set a meal in the morning and return home to a fully cooked dinner in the evening. The slow cooker's low, medium, and high temperature settings ensure that a variety of dishes can be made, from hearty stews to tender meats and vegetables.

Another notable characteristic is its steaming function. The BCS600XL comes with a steaming tray that allows for healthy cooking, preserving the nutrients and flavors of vegetables, seafood, and other ingredients. The steam function can be adjusted for different cooking times, making it ideal for preparing side dishes or light meals.

The sautéing function is an essential part of the BCS600XL’s versatility. This feature enables users to brown meats or sauté vegetables directly in the cooking pot, eliminating the need for an extra pan and saving time on cleanup. The pot is made of durable materials, ensuring even heat distribution for optimal cooking results.

In terms of design, the Breville BCS600XL boasts a sleek and modern appearance that complements any kitchen décor. It is equipped with an easy-to-read digital interface, making it user-friendly for home cooks of all experience levels. The large capacity pot allows for cooking larger meals, accommodating family gatherings or meal prep for the week ahead.

Safety is also a priority with the BCS600XL. The appliance incorporates features such as a locking lid to prevent spills and an automatic shut-off function, enhancing user safety during cooking sessions.

Overall, the Breville BCS600XL is a remarkable multi-cooker that combines functionality with modern technology. Its slow cooking, steaming, and sautéing features make it an excellent choice for cooks looking to streamline their meal preparation process while still enjoying tasty and nutritious dishes. Whether for a busy family or an individual looking to simplify cooking, the BCS600XL proves to be an indispensable kitchen companion.