Breville recommends safety first continued
•Ensure that the Breville Baker’s Oven is switched off and then unplugged from the power outlet when not in use and before cleaning.
•Do not immerse the bread pan in water. Doing so may interfere with the free movement of the shaft. Wash only the interior of the bread pan.
•Do not leave the lid standing open for extended periods of time.
•Always ensure the kneading blade is removed from the base of the baked loaf prior to slicing.
•Keep the inside and outside of the appliance clean. Follow the cleaning instructions provided in this book.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
•Fully unwind the power cord before use.
•Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
•To protect against electric shock, do not immerse power cord, power plug or appliance in water.
•The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•It is recommended to inspect the appliance regularly. Do not use the appliance if the power cord, power plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
•Any maintenance, other than cleaning, should be performed at an authorised Breville Service Centre.
•This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
•The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
Steam vents are very hot during baking.