KitchenAid BUILT-IN REFRIGERATOR manual Using Controls

Page 7

Using Controls

IMPORTANT:

■The refrigerator control adjusts the refrigerator compartment temperature. The freezer control adjusts the freezer compartment temperature.

■Wait 24 hours after you turn on the refrigerator before you put food into it. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer controls to a lower (colder) setting will not cool the compartments any faster.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

■The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

NOTE: The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.

Turning Refrigerator On and Viewing Set Points

■Press and hold POWER (ON/OFF) for 2 seconds.

NOTE:

■After the refrigerator is turned on, the Over Temperature audio alarm and indicator light will activate every

1¹⁄₂ hours until the refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively, or until the alarm is turned off. To turn off the audio alarm and indicator light, see “Master Alarm Reset.”

■The ON/OFF switch on the control shuts down the cooling, fans and compressors as well as the control to run. To turn the power off completely, use the power ON/ OFF switch located behind the top grille. See “Power ON/ OFF Switch.”

Viewing the Celsius Temperatures

■Press °C SELECT touch pad. The negative sign (-) will light up. To redisplay degrees Fahrenheit, press °C SELECT again.

NOTE: If the freezer temperature is below zero, the negative sign next to the freezer display will light up. This is normal.

NOTE: The set point range for the freezer is -5°F to 6°F (-21°C to -14°C). The set point range for the refrigerator is 34°F to 46°F (1°C to 8°C).

CONDITION/REASON:

TEMPERATURE

 

ADJUSTMENT:

 

 

REFRIGERATOR too cold

REFRIGERATOR Control 1°

Not set correctly for conditions

higher

 

 

 

REFRIGERATOR too warm

REFRIGERATOR Control 1°

High use or room very warm

lower

 

 

 

FREEZER too cold

FREEZER Control 1° higher

Not set correctly for conditions

 

 

 

FREEZER too warm/too little

FREEZER Control 1° lower

ice

 

High use or heavy ice use

 

 

 

 

 

Water Filter Status & Reset

NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

The water filter display will help you know when it is time to change your filter. To change the filter, see the “Water Filtration System” section.

INDICATOR:

STATUS:

 

 

99 percent

New filter installed

 

 

10 percent

Order replacement filter

 

 

0 percent or flow decreases

Replace filter

 

 

■After replacing the water filter, press RESET and hold for

2 seconds to change the water filter display to 99 percent.

Max Cool

The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.

■Press MAX COOL to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.

Adjusting Controls

NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

To adjust set point temperatures:

■Press the refrigerator or freezer PLUS (+) or MINUS (-) key pad until the desired temperature is reached.

NOTE: The temperature display will remain at 34°F (1°C) and -5°F (-21°C) for the refrigerator and freezer compartments, respectively, while the Max Cool feature is enabled. After

24 hours, the refrigerator returns to the previous temperature set points.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Side by Side BUILT-IN Refrigerator Table of Contents/Índice/Table des matièresÍndice Before you throw away your old refrigerator or freezer Refrigerator SafetyWater Supply Requirements Power On/Off SwitchBefore USE Refrigerator USEArchitect Series To remove top grille To Turn Power On or OffClassic, Overlay and Complete Series To remove top grille To replace top grilleStyle 1 Non-Dispenser Models Style 2 Dispenser Models Water System PreparationNormal Sounds Ensuring Proper Air CirculationUsing Controls Water and Ice Dispensers Water Filtration System Ice Maker and Storage Bin To remove and replace the ice bin Refrigerator FeaturesClean the ice storage bin Refrigerator ShelvesCrisper and Covers Ingredient Care CenterCovered Utility Bin Wine Rack Utility Compartment Freezer Featuresdoor FeaturesFreezer Shelf Freezer BasketChanging the Light Bulbs CleaningTo clean your refrigerator Refrigerator CareVacation Care Power InterruptionsTroubleshooting Water dispenser will not operate properly Off-taste, odor or gray color in the iceIce dispenser will not operate properly Ice bin difficult to removeU.S.A Assistance or ServiceWater Filter Certifications AccessoriesCanada Application Guidelines/Water Supply Parameters Product Data SheetsKitchenAid will not pay for Kitchenaid BUILT-IN Refrigerator WarrantyTWO-YEAR Full Warranty Lifetime Limited Warranty on Door BinsAntes de tirar su refrigerador o congelador viejo Seguridad DEL RefrigeradorInterruptor de Encendido/Apagado Antes DE UsarUSO DE SU Refrigerador Requisitos del suministro de aguaPara encender o apagar Para volver a colocar la rejilla superiorSerie Architect Para quitar la rejilla superior Serie Pro Line Para quitar la rejilla superiorEstilo 2 Modelos con despachador Preparación del sistema de aguaSonidos normales Estilo 1 Modelos sin despachadorAjuste de los controles Uso de los controlesPara conectar el refrigerador y ver los puntos de ajuste Para ver las temperaturas en centígradosEstado del filtro de agua y reajuste Holiday Mode Modo de día de fiestaFunciones de alarma Restablecimiento de la alarma maestra Over Temperature Temperatura excesivaEl despachador de hielo Call Service Solicite servicioDespachadores de agua y hielo Door Open Puerta abiertaSistema de filtración de agua Cómo incrementar la producción de hielo Fábrica de hielo y depósitoUso del despachador sin el filtro de agua Estilo Cómo encender y apagar la fábrica de hieloPara quitar y volver a colocar el balde de hielo Cómo quitar y volver a colocar el depósito de hieloEstilo Cómo limpiar el depósito o balde de hieloCómo ajustar el centro de cuidado de ingredientes Características DEL RefrigeradorEstantes del refrigerador Centro de cuidado de ingredientesCaracterísticas DEL Congelador Recipientes de las puertas Características DE LA PuertaCuidado DE SU Refrigerador Compartimiento utilitarioLuces del congelador Cómo cambiar los focosLuz del despachador en algunos modelos Luz del panel de control del refrigerador EstiloCortes de corriente Solución DE ProblemasCuidado durante las vacaciones El hielo tiene mal sabor, mal olor o un color grisáceo El refrigerador parece hacer mucho ruidoEl despachador de hielo no funciona debidamente El despachador de agua no funciona debidamente El balde de hielo es difícil de sacarHay filtración de agua o hielo en el despachador Hay acumulación de humedad en el interior El agua del despachador no está lo suficientemente fríaEl divisor entre los dos compartimientos está caliente La temperatura está demasiado calienteAccesorios Ayuda O Servicio TécnicoEn Canadá En los EE.UUPautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoKitchenAid no pagará por Garantía Total DE DOS Años EN EL RefrigeradorAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurUtilisation DU Réfrigérateur Avant L’UTILISATIONSpécifications de l’alimentation en eau Série Pro Line Pour enlever la grille supérieure Réinstallation de la grille supérieureCommutateur marche/arrêt Série Architect Pour enlever la grille supérieureRemarques Préparation du système d’eauSons normaux Pour s’assurer d’une Circulation d’air appropriéePour ajuster les points de réglage de température Utilisation des commandesAjustement des commandes Pour voir les températures en CelsiusMax Cool refroidissement maximal Holiday Mode mode vacancesFonctions dalarme Réinitialisation de lalarme principale État et réinitialisation du filtre à eauDoor Open porte ouverte Over temperature dépassement de la températureCall Service appel de service Distributeurs d’eau et de glaçonsSystème de filtration deau Utilisation du distributeur sans filtre à eau Remplacement du filtre dans la grille de la basePurge du système d’eau après le remplacement du filtre Machine à glaçons et bac/seau d’entreposagePour retirer et réinstaler le seau à glace Pour retirer et réinstaller le bac à glaçonsAugmentation du taux de production de glaçons Style Mise en marche/ arrêt de la machine à glaçonsRéglage du centre de soin des ingrédients Caractéristiques DU RéfrigérateurTablettes du réfrigérateur Centre de soins des ingrédientsCaractéristiques DU Congélateur Compartiments dans la porte PorteEntretien DU Réfrigérateur Compartiment utilitaireLampe de distributeur sur certains modèles Remplacement des ampoules d’éclairageLampes du congélateur et du bac à légumes Lampe du tableau de commande du réfrigérateur StylePannes de courant Entretien avant les vacancesDépannage Le distributeur de glaçons ne fonctionne pas correctement Mauvais goût, odeur ou couleur grise des glaçonsLe seau à glaçons est difficile à enlever ’eau du distributeur n’est pas assez froide Le distributeur d’eau ne fonctionne pas bienDe l’eau ou de la glace coule du distributeur Le débit d’eau du distributeur diminue beaucoupAccessoires Assistance OU ServiceSystème de filtration d’eau à la grille de la base Feuilles DE Données SUR LE ProduitGarantie Limitée À VIE SUR LES Compartiments Dans LA Porte Garantie Complète DE Deux ANSKitchenAid ne paiera pas pour All rights reserved 2309068

BUILT-IN REFRIGERATOR specifications

The KitchenAid Built-In Refrigerator is a blend of style, functionality, and advanced technology tailored for modern kitchens. Engineered to fit seamlessly into your cabinetry, this refrigerator not only enhances the aesthetic appeal of your kitchen but also offers outstanding performance. With its flush installation and customizable panel options, it can match the look of your cabinets, creating a cohesive design that elevates your culinary space.

One of the standout features of the KitchenAid Built-In Refrigerator is its advanced cooling system. It incorporates a dual cooling system that ensures optimal temperature and humidity levels for both the refrigerator and freezer compartments. This technology prevents the transfer of odors and ensures fresh, flavorful food preservation. The refrigerator also features a Produce Preserver, which utilizes ethylene gas-absorbing packets to delay over-ripening of fruits and vegetables, helping to extend their freshness.

Additionally, this model is equipped with an In-Door-Ice System, which maximizes usable shelf space while providing easy access to ice. The system is designed to keep ice readily available without impinging on the storage capabilities of the refrigerator. With its sleek design, the refrigerator also includes a water dispenser that provides filtered water at the touch of a button, further enhancing convenience.

Another technological advancement in the KitchenAid Built-In Refrigerator is the Smart Feature compatibility. With Wi-Fi connectivity, users can monitor and manage the refrigerator remotely using their smartphones. This feature allows for the adjustment of temperature settings and even alerts when the door is left open, ensuring food safety.

Energy efficiency is also a priority with this model. The KitchenAid Built-In Refrigerator is designed to meet ENERGY STAR® guidelines, helping consumers save on electricity bills while minimizing environmental impact. With a focus on durability and performance, this refrigerator boasts a robust stainless-steel finish, making it resistant to fingerprints and easy to clean.

In summary, the KitchenAid Built-In Refrigerator is an exceptional choice for those seeking a high-end appliance that combines style, innovative features, and energy efficiency. Its smart technologies, advanced cooling capabilities, and customizable options make it a must-have for discerning homeowners looking to enhance their kitchen experience.
Top Page Image Contents