KitchenAid 8573755 A Installation Instructions, Prepare Cabinet Opening, Electrical Connection

Page 5

Garbage Disposer:

If you plan to install a garbage disposer, an additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required.

Recommended ground method

This appliance must be grounded. This appliance is equipped with a power supply cord having 3 prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating prong ground-type outlet, grounded in accordance with local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Cabinet Opening

1.Prepare the cabinet opening by applying self-adhesive moisture protection tape to the dry dust-free underside of the countertop.

Electrical Connection

Option 1: Power Supply Cord Method

countertop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

moisture

 

 

 

 

 

 

 

 

 

 

 

 

tape

 

 

 

protection tape

 

 

 

 

¹⁄₂" (12.7 mm) from

 

 

 

 

front of countertop

 

 

 

 

2.Turn off water supply.

3.Decide which attaching tabs to use to secure the dishwasher. The four side attaching tabs are recommended.

4.If the countertop material permits and the optional top attaching brackets will be used, install them now.

Slide the brackets under the raised tabs. Using the flat side of the side cutting pliers, lightly tap the brackets into place. Make sure the locking tabs on the brackets are completely passed through the raised tabs on the dishwasher.

mounting

bracket

locking tab

raised tab

5.If using the factory-installed power cable and plug, go to “Electrical connection” section, Option: 1: Power Supply Cord Method.

If direct wiring the dishwasher, go to “Electrical connection” section, Option: 2: Direct Wiring Method.

WARNING

Tip Over Hazard

Do not use dishwasher drawer until inside cabinet opening.

Doing so can result in serious injury or cuts.

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury.

1.Place cardboard or other protective covering on the floor in front of cabinet opening. Place the dishwasher on covering.

2.Begin to route the hoses and power supply cord through the utility hole in the cabinet.

3.Push dishwasher part way into the opening.

IMPORTANT: Push against the outside edges of drawers as shown. Do not push against the center of the drawers.

NOTE: Model shown without front panels. Some models are shipped with front panels installed.

5

Image 5
Contents 528879/8573755 a Installation Instructions Drawer DishwasherTable of Contents Drawer Dishwasher SafetyProduct dimensions Installation RequirementsTools and Parts Location RequirementsWater Supply Requirements Cabinet dimensions/requirementsElectrical Requirements For a grounded, cord-connected dishwasherOption 1 Power Supply Cord Method Installation InstructionsPrepare Cabinet Opening Electrical ConnectionRemove factory-installed power cord Option 2 Direct Wiring MethodRemove the house wiring knockout Install Dishwasher If Installing Flexible Trim PiecesSlide the left-hand runner back into the dishwasher Choose attachment optionOption 1 Side attachment Option 2 Top attachmentOption 1 Sink drain waste tee connection Install the Drain HoseOption 2 Garbage disposal connection Option 1 Install standard door panels on some models Install Drawer Door Panels and Toe PanelConnect to Water Supply Option 3 Air break connectionBottom edge of the toe panel Option 1 Install standard toe panelFloor If not, remove the toe panel and shortenCustom door panel dimensions Option 2 Install custom door panels on some modelsCustom toe panel dimensions Option 2 Install custom toe panel on some modelsConnect the medallion connector to the dishwasher Connector Repeat steps 2-15 for other custom door panelIf dishwasher does not operate, check the following Complete Installation528879/8573755 Rev. a 528879/8573755A Instructions d’installation Lave-vaisselle tiroirTable des matières Sécurité DU LAVE-VAISSELLE TiroirOutillage et pièces Exigences DinstallationEmplacement d’installation Pour un lave-vaisselle branché en permanence Spécifications de l’alimentation en eauSpécifications électriques Préparation de la cavité d’installation Instructions DinstallationMéthode recommandée de liaison à la terre Raccordement électriqueOption 2 Méthode par câblage direct Enlever le cordon d’alimentation installé à l’usineAvertissement Installation du lave-vaisselle Cas de linstallation de moulures Extrudées flexiblesOption 1 Fixation latérale Options de fixation’arrière Option 2 Fixation supérieure LinstallationRaccordement à la canalisation dévacuation Option 3 Connexion au brise-siphon Raccordement à la source dalimentation en eauOption 2 Connexion sur le broyeur à déchets Panneau Avant inférieur Éliminer les bavures sur l’arête de Option 1 Installation de la planche de plinthe standardDimensions des panneaux avant personnalisés Placer le panneau avant personnalisé face vers le bas Dimensions de la planche de plinthe personnalisée528879/88573755 Rév. a Achever l’installation

528879, 8573755 A specifications

The KitchenAid 8573755 A,528879 is a versatile and powerful appliance designed to elevate the culinary experience in any kitchen. With its robust performance and innovative technologies, it caters to both amateur cooks and seasoned chefs alike.

One of the standout features of the KitchenAid 8573755 is its powerful motor, engineered for heavy-duty tasks. This ensures that the appliance can easily handle tough mixing and kneading, making it ideal for bread dough and other thick mixtures. The direct drive transmission allows for consistent performance, ensuring that users can achieve their desired results with minimal effort.

Incorporating advanced planetary mixing action, the KitchenAid 8573755 rotates the bowl in one direction while the beater rotates in the opposite direction. This unique feature ensures thorough mixing and even incorporation of ingredients, significantly reducing preparation time. Home cooks will appreciate how quickly and efficiently tasks such as whipping cream or mixing batter can be completed.

The KitchenAid 8573755 also comes with a variety of attachments, increasing its versatility. From a dough hook to a flat beater and wire whip, these accessories expand the kitchen's functionality, allowing users to whip, beat, knead, and mix with ease. Additionally, the compatibility with a wide range of optional attachments, such as pasta makers and food grinders, transforms the appliance into a multifunctional tool that can accommodate numerous culinary tasks.

Aesthetically, the KitchenAid 8573755 boasts a classic and timeless design that fits seamlessly into any kitchen decor. Its robust construction ensures durability, while the smooth surface makes cleaning a breeze. The appliance is also equipped with a tilt-head design, making it easy to access the bowl and add ingredients without hassle.

Safety is also a priority with the KitchenAid 8573755, featuring a power hub that allows for easy attachment of various tools and minimizing any risk during operation.

In summary, the KitchenAid 8573755 A,528879 combines power, versatility, and elegance, making it a must-have for anyone looking to enhance their cooking experience. With its robust features, advanced technologies, and focus on user convenience, this appliance stands out as a reliable companion in the kitchen.