KitchenAid 8573755 A, 528879 Connect to Water Supply, Install Drawer Door Panels and Toe Panel

Page 11

Option 3: Air break connection

1.Route the drain hoses as shown.

2.Decide if the drain hoses need to be trimmed. If they do, trim them.

wire clip

3.Slip a wire clip over each drain

hose. Push the hoses into the drain hose connector firmly,

5 clicks.

4. Position the wire clips between the

wire clip

two positioning ribs on the drain

drain hose

hose connector.

connector

5.Attach the drain hose connector to the air break using the supplied hose clamp.

air break

drain hose connector

waste

valve

water supply

8" (20.3 cm) min. bend radius from valve

Connect to Water Supply

1.Install the flat seal washer on the end of the inlet hose. Connect the inlet hose to the water supply valve. Tighten securely.

2.Turn the water valve on and check for any leaks.

valve

flat seal washer

inlet hose

Install Drawer Door Panels and Toe Panel

Option 1: Install standard door panels (on some models)

1.Remove door panels from box and discard all shipping material.

2.On the shorter door panel (lower drawer) and on the metal plate, remove the tape securing the connector and wires. Discard tape.

3.Connect the end of the medallion connector to the connector from the lower drawer.

wire opening

lower door panel

metal plate

end of medallion connector

4.Gently feed the wires and connectors into the metal plate wire opening.

5.Line up door panel tabs to slots in metal plate. Do not pull the connector from wire opening. (Pull the drawer out slightly to aid in installing the panel.)

slots

door panel

tabs

 

 

metal plate

6.Push the door panel down to lock in place.

7.Repeat steps 2–6 for the top door panel.

8.When installed properly, top panel should be even with top of dishwasher with a ³⁄₈" (9.5 mm) gap between the top and bottom panel.

3.Open top drawer. Remove the packing tape from the front and rear of dish rack.

4.Close drawer.

5.Open bottom drawer. Remove the packing tape from the front and rear of dish rack.

6.Close drawer.

11

Image 11
Contents 528879/8573755 a Installation Instructions Drawer DishwasherTable of Contents Drawer Dishwasher SafetyLocation Requirements Installation RequirementsProduct dimensions Tools and PartsFor a grounded, cord-connected dishwasher Cabinet dimensions/requirementsWater Supply Requirements Electrical RequirementsElectrical Connection Installation InstructionsOption 1 Power Supply Cord Method Prepare Cabinet OpeningRemove factory-installed power cord Option 2 Direct Wiring MethodRemove the house wiring knockout Install Dishwasher If Installing Flexible Trim PiecesOption 2 Top attachment Choose attachment optionSlide the left-hand runner back into the dishwasher Option 1 Side attachmentOption 1 Sink drain waste tee connection Install the Drain HoseOption 2 Garbage disposal connection Option 3 Air break connection Install Drawer Door Panels and Toe PanelOption 1 Install standard door panels on some models Connect to Water SupplyIf not, remove the toe panel and shorten Option 1 Install standard toe panelBottom edge of the toe panel FloorCustom door panel dimensions Option 2 Install custom door panels on some modelsRepeat steps 2-15 for other custom door panel Option 2 Install custom toe panel on some modelsCustom toe panel dimensions Connect the medallion connector to the dishwasher ConnectorIf dishwasher does not operate, check the following Complete Installation528879/8573755 Rev. a 528879/8573755A Instructions d’installation Lave-vaisselle tiroirTable des matières Sécurité DU LAVE-VAISSELLE TiroirOutillage et pièces Exigences DinstallationEmplacement d’installation Pour un lave-vaisselle branché en permanence Spécifications de l’alimentation en eauSpécifications électriques Raccordement électrique Instructions DinstallationPréparation de la cavité d’installation Méthode recommandée de liaison à la terreOption 2 Méthode par câblage direct Enlever le cordon d’alimentation installé à l’usineAvertissement Installation du lave-vaisselle Cas de linstallation de moulures Extrudées flexiblesOption 1 Fixation latérale Options de fixation’arrière Option 2 Fixation supérieure LinstallationRaccordement à la canalisation dévacuation Option 3 Connexion au brise-siphon Raccordement à la source dalimentation en eauOption 2 Connexion sur le broyeur à déchets Panneau Avant inférieur Éliminer les bavures sur l’arête de Option 1 Installation de la planche de plinthe standardDimensions des panneaux avant personnalisés Placer le panneau avant personnalisé face vers le bas Dimensions de la planche de plinthe personnalisée528879/88573755 Rév. a Achever l’installation

528879, 8573755 A specifications

The KitchenAid 8573755 A,528879 is a versatile and powerful appliance designed to elevate the culinary experience in any kitchen. With its robust performance and innovative technologies, it caters to both amateur cooks and seasoned chefs alike.

One of the standout features of the KitchenAid 8573755 is its powerful motor, engineered for heavy-duty tasks. This ensures that the appliance can easily handle tough mixing and kneading, making it ideal for bread dough and other thick mixtures. The direct drive transmission allows for consistent performance, ensuring that users can achieve their desired results with minimal effort.

Incorporating advanced planetary mixing action, the KitchenAid 8573755 rotates the bowl in one direction while the beater rotates in the opposite direction. This unique feature ensures thorough mixing and even incorporation of ingredients, significantly reducing preparation time. Home cooks will appreciate how quickly and efficiently tasks such as whipping cream or mixing batter can be completed.

The KitchenAid 8573755 also comes with a variety of attachments, increasing its versatility. From a dough hook to a flat beater and wire whip, these accessories expand the kitchen's functionality, allowing users to whip, beat, knead, and mix with ease. Additionally, the compatibility with a wide range of optional attachments, such as pasta makers and food grinders, transforms the appliance into a multifunctional tool that can accommodate numerous culinary tasks.

Aesthetically, the KitchenAid 8573755 boasts a classic and timeless design that fits seamlessly into any kitchen decor. Its robust construction ensures durability, while the smooth surface makes cleaning a breeze. The appliance is also equipped with a tilt-head design, making it easy to access the bowl and add ingredients without hassle.

Safety is also a priority with the KitchenAid 8573755, featuring a power hub that allows for easy attachment of various tools and minimizing any risk during operation.

In summary, the KitchenAid 8573755 A,528879 combines power, versatility, and elegance, making it a must-have for anyone looking to enhance their cooking experience. With its robust features, advanced technologies, and focus on user convenience, this appliance stands out as a reliable companion in the kitchen.