GENERAL OPERATION
•If a conventional system is selected, take the microphone
Backlight Operation
The display and keypad backlight can be controlled by the BACK- LIGHT menu parameter (see page 40). The three states that can be selected are Bright, Dim, and Off. If this menu parameter is not select- able, the backlight is fixed in one of these states by programming.
System/Group Display Information
The selected system and group are displayed using either a Numeric or Alpha Tag display mode. The display mode is selectable if the S/G DISPL menu parameter is available (see page 33). Otherwise, it is fixed in one of these modes by programming.
Numeric Mode - In the numeric mode, the selected system and group numbers are displayed on the top line as Sxx and Gxx, and the group alpha tag is displayed on the bottom line. For example, System 1, Group 1 (CAR 220) is displayed as follows. The system alpha tag is not displayed in this mode.
System Number
Group Number
Group Alpha Tag
Numeric Display Mode
Alpha Tag Mode - In the alpha tag mode, the system alpha tag is displayed on the top line and the group alpha tag is displayed on the
16