EFJohnson 002-9800-401 manual Alpha Tag Display Mode Selecting the System and Group

Page 17

GENERAL OPERATION

bottom line. For example, a “SECURITY” system and “CAR 220” group are displayed as follows. The system and group numbers are not displayed in this mode.

System Alpha Tag

Group Alpha Tag

Alpha Tag Display Mode

Selecting the System and Group

The front panel Select switch is used to change the system and group. Pressing this switch toggles between the system and group select modes, and then rotating it increases or decreases the system or group.

In the Numeric display mode (see preceding description), the system select mode is indicated when the arrow points to “Sxx”, and the group select mode is indicated when it points to “Gxx” (see following diagram).

System Select		Group Select
Mode		Mode

Select Mode Indication With Numeric Display

In the Alpha Tag display mode, the system select mode is indicated by an underline in the left-most character position of the system alpha tag. Likewise, the group select mode is indicated by an underline in the left-most position of the group alpha tag (see following diagram).

17

Image 17

Contents Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Multi-Net Features General FeaturesLTR Features Conventional FeaturesFront Panel Controls Controls and DisplayControls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and GroupSetting Squelch Control Select Mode Indication With Alpha Tag DisplayIntroduction Standard CallsPlacing a Standard Call Multi-Net and LTR OperationReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone Calls Other Special CallsBusy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone CallReceiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Emergency Switch Call IndicatorEncryption Encryption IndicatorHorn Alert Function FCN SwitchHome System/Group Select Option Select Proceed Clear-To-Talk Tone Power Turn-Off DelayTime-Out Timer Stealth ModeOption Switches Option Switches and Menu ModeTone Select Transmitter Thermal FoldbackUsing Menu Mode Menu Mode IntroductionSwitch Menu Mode and Option Switch FunctionsSystem and Group Scan System and Group Scan Scan List Programming Single and Multiple Site ScanScan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional ModesConventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status MessageCalls on Priority and Block ID Codes Caller IdentificationTransmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls Transpond System SearchPriority and Block ID Codes Conventional FeaturesMonitor Mode Receive-Only Groups Transmit Disable On BusyCall Guard Squelch Talk-AroundPriority Group Sampling Supervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Multi-Net Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode MessagesOperation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous