EFJohnson 002-9800-401 manual Receiving a Telephone Call, Placing Other Multi-Net Special Calls

Page 23

TELEPHONE CALLS AND OTHER SPECIAL CALLS

Receiving a Telephone Call

1.Turn transceiver power on and set the volume as described starting on page 15.

2.Select or scan the system and group programmed for telephone calls.

When a telephone or Multi-Net special call group is selected, is displayed.

3.When “ringing” is heard, press the PTT switch and respond. The PTT switch must be pressed to talk and released to listen the same as with standard calls.

4.When the call is finished, it should be terminated as in step 7 of the preceding section.

Placing Other Multi-Net Special Calls

Multi-Net special calls include the telephone calls just described and also Unique ID and Directed Group calls. Unique ID calls are to specific mobiles, and Directed Group calls are to specific groups. These calls can be placed to other users assigned to your site or some other site that is part of the same network.

As with telephone calls, a microphone with a telephone keypad is required to dial the number specifying the mobile being called. The numbers dialed are 4-8 digits long, and they will be provided by your system operator. The procedure used to place these calls is as follows:

1.Select the system and group programmed for Unique ID and Directed Group calls. When one of these groups or a telephone group is selected, is displayed.The group alpha tag displayed on the lower line may also indicate when one of these groups is selected.

2.Briefly press the PTT switch to obtain a dial tone. The procedure is similar to that used with telephone calls, and the Busy Queuing and Roaming features are available if programmed. Refer to step 4 near the bottom of page 19 for more information.

23

Image 23

Contents Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Conventional Features General FeaturesMulti-Net Features LTR FeaturesFront Panel Controls Controls and DisplayControls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and GroupSetting Squelch Control Select Mode Indication With Alpha Tag DisplayMulti-Net and LTR Operation Standard CallsIntroduction Placing a Standard CallReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone Calls Other Special CallsBusy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone CallReceiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Emergency Switch Call IndicatorEncryption Encryption IndicatorHorn Alert Function FCN SwitchHome System/Group Select Option Select Proceed Clear-To-Talk Tone Power Turn-Off DelayTime-Out Timer Stealth ModeTransmitter Thermal Foldback Option Switches and Menu ModeOption Switches Tone SelectUsing Menu Mode Menu Mode IntroductionSwitch Menu Mode and Option Switch FunctionsSystem and Group Scan System and Group Scan Scan List Programming Single and Multiple Site ScanScan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional ModesConventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status MessageCalls on Priority and Block ID Codes Caller IdentificationTransmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls Transpond System SearchPriority and Block ID Codes Conventional FeaturesMonitor Mode Receive-Only Groups Transmit Disable On BusyCall Guard Squelch Talk-AroundPriority Group Sampling Supervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Multi-Net Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode MessagesOperation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous