EFJohnson 002-9800-401 manual Multi-Net Telephone Call Tones, LTR Telephone Call Tones

Page 56

MISCELLANEOUS

Multi-Net Telephone Call Tones

The following tones are generated by the Multi-Net equipment and are heard when making a telephone, unique ID, or directed group special call on a Multi-Net system.

Confirmation Tone - This is a short tone that sounds when the number just dialed has been accepted by the system.

Call Proceed Tone - With Multi-Net directed group calls (see page 23), ringing does not occur after the number is dialed. Instead, another short tone sounds after the confirmation tone to indicate that the audio path is complete and speaking can begin.

End Call Tone - Three beeps which indicate that the end of the call has been detected by the system.

Proceed Dialing Tone - When placing a landside-to-mobile telephone call (see page 25), the landside caller may enter a special number which specifies the mobile being called. This tone indicates when that number should be dialed.

LTR Telephone Call Tones

The following tones are generated by LTR interconnect equipment and are heard when making LTR telephone calls. Therefore, if some other type of interconnect equipment is being used, these tones may vary.

Reorder Tone - Three beeps which indicate that the call has been termi- nated by the system.

Return Time Warning Tone - Two beeps which warn that you have not transmitted for an extended period. If you do not transmit within 5 seconds, the call is automatically terminated by the system. The time between transmissions is one of the parameters used by the system to detect the end of a call when the # character is not sent.

56

Image 56

Contents Operating Manual Safety Information Page FCC Exposure Limits FCC Limits for Maximum Permissible Exposure MPEFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide General Features Multi-Net FeaturesLTR Features Conventional FeaturesControls and Display Front Panel ControlsControls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Alpha Tag Display Mode Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch ControlStandard Calls IntroductionPlacing a Standard Call Multi-Net and LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Other Special Calls Placing Telephone CallsBusy and Out-Of-Range Conditions Receiving a Telephone Call Placing Other Multi-Net Special CallsReceiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Call Indicator Emergency SwitchEncryption Indicator EncryptionHorn Alert Function FCN SwitchHome System/Group Select Option Select Power Turn-Off Delay Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerOption Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode Introduction Using Menu ModeMenu Mode and Option Switch Functions SwitchSystem and Group Scan System and Group Scan Single and Multiple Site Scan Scan List ProgrammingScan Delay and Continue Timers Transmitting In The Scan Mode MULTI-NET, LTR, Conventional Modes GeneralConventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Status Select Mode Selected Status Message Transmitting Status MessagesCaller Identification Calls on Priority and Block ID CodesTransmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls System Search TranspondPriority and Block ID Codes Conventional FeaturesMonitor Mode Transmit Disable On Busy Receive-Only GroupsTalk-Around Call Guard SquelchPriority Group Sampling Miscellaneous Supervisory TonesMiscellaneous Multi-Net Telephone Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Menu Mode Messages Bright DIM OFFOperation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous