EFJohnson 002-9800-401 Transmitting Status Messages, Status Select Mode Selected Status Message

Page 45

MULTI-NET FEATURES

other selectable systems. While searching is occurring, “ROAMING” is indicated on the lower line of the display as shown below. When a new site is located, this message is no longer displayed, and the system and group of the new site is displayed.

The new system is the first higher system with a different site that could be accessed (wrap-around occurs after the highest system is accessed). The new group is either the same group that was displayed before roaming occurred or the last selected group of that system (programming determines which is selected).

Transmitting Status Messages

Preprogrammed status messages can be transmitted whenever the transmitter is keyed with a Multi-Net system selected. If this feature is available, the STATUS menu parameter (see page 33) is programmed to allow the desired message to be selected.

Selecting the STATUS menu parameter enables the status message select mode. This mode is indicated by “STATUS” on the top line of the display and the bottom line indicates the currently selected status message (see following illustration).

Status Select Mode

Selected Status

Message

To change the current message, press the Select switch. When “NO STAT” is selected, no message is transmitted. To select the current

45

Image 45

Contents Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Multi-Net Features General FeaturesLTR Features Conventional FeaturesFront Panel Controls Controls and DisplayControls and Display Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation Numeric Display Mode Backlight OperationSystem/Group Display Information Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and GroupSetting Squelch Control Select Mode Indication With Alpha Tag DisplayIntroduction Standard CallsPlacing a Standard Call Multi-Net and LTR OperationReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone Calls Other Special CallsBusy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone CallReceiving Other Multi-Net Special Calls General Features Landside-Originate CallsBank Select Emergency Switch Call IndicatorEncryption Encryption IndicatorFunction FCN Switch Home System/Group SelectHorn Alert Option Select Proceed Clear-To-Talk Tone Power Turn-Off DelayTime-Out Timer Stealth ModeOption Switches Option Switches and Menu ModeTone Select Transmitter Thermal FoldbackUsing Menu Mode Menu Mode IntroductionSwitch Menu Mode and Option Switch FunctionsSystem and Group Scan System and Group Scan Scan List Programming Single and Multiple Site ScanScan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional ModesConventional Operation Monitoring Conventional Channels Before Transmitting MULTI-NET Features Standard and Special CallsBusy Queuing Multi-Net Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status MessageCalls on Priority and Block ID Codes Caller IdentificationTransmit Inhibit LTR Features Standard and Telephone CallsBusy Queuing LTR Transpond System SearchConventional Features Monitor ModePriority and Block ID Codes Receive-Only Groups Transmit Disable On BusyCall Guard Squelch Talk-AroundPriority Group Sampling Supervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Multi-Net Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode MessagesSystem Operator Programming Speaking Into MicrophoneOperation At Extended Range Preventing Battery Discharge Transceiver ServiceLicensing Miscellaneous