MISCELLANEOUS
seconds before this tone sounds, a single beep sounds to indicate that time-out will soon occur.
•Transmit Inhibit - If this tone sounds as soon as the PTT switch is pressed with a Multi-Net or LTR system selected and “TX INHIB” is displayed, the transmitter has been disabled by the Transmit Inhibit feature (see page 47).
•Transmit Disable On Busy - If this tone sounds as soon as the push-to- talk switch is pressed with a conventional system selected and “DSBL BSY” is displayed, the channel is busy and the transmitter was disabled by the Transmit Disable On Busy feature (see page 51).
•Receive-Only Channel - If this tone sounds as soon as the push-to-talk switch is pressed with a conventional system selected and “TX DSBL” is displayed, the channel is receive-only (see page 51).
•Tx While Receiving Call - If the push-to-talk switch is pressed while receiving a Multi-Net or LTR call, this tone sounds and “DSBL BSY” is displayed.
Proceed (Clear-To-Talk) Tone - This is a short tone which sounds after the push-to-talk switch is pressed to indicate when talking can begin (see page 30). A loud (two-pitch) tone may also be programmed.
Key Press Tone - This is a short tone that indicates when an option switch is pressed (all modes).
Priority Call Tone - This is a short tone that sounds when a call is received on a conventional first or second priority channel (see page 53).
Wrap-Around Tone - This is a two-pitch tone that indicates that the highest or lowest channel was displayed and that wrap-around has occurred.
Error Tone - This is a two-pitch tone that indicates that an error condition has occurred.