EFJohnson 002-9800-401 manual Receiving Other Multi-Net Special Calls

Page 24

TELEPHONE CALLS AND OTHER SPECIAL CALLS

3.Dial the 4-8 digit number using the microphone keypad. Refer to step 4 on page 22 for more information.

4.A tone then sounds to indicate that the call was accepted by the system. If this tone does not sound, an incorrect or unauthorized number may have been dialed. The call then proceeds as follows:

Unique ID Call - Ringing is heard to indicate that the other transceiver is being rung. If there is no answer, ringing automatically stops after several rings and the call is terminated. When the other party answers, respond as with a standard call.

Directed Group Call - A second tone sounds to indicate that the path is complete and you should transmit your message. No ringing occurs and the other party does not answer first.

5.When the call is finished, it should be terminated by pressing the # key. Three beeps indicate that the call has been terminated.

Receiving Other Multi-Net Special Calls

When a Unique ID call is received, a ringing tone sounds similar to when a telephone call is received. Unique ID calls are received regardless of which group is selected. All that is required is that a system programmed for that call must be selected. To respond to a unique ID call, you may need to manually select the unique ID group if it is not selected automatically or some other group is displayed when the PTT switch is pressed.

To receive and respond to a Directed Group call, the group programmed with the ID code being sent must be selected. This call is handled the same as the standard call described on page 20. No ringing occurs, and an incoming call is indicated when you hear the voice of the person placing the call.

24

Image 24

Contents Operating Manual Safety Information Page FCC Exposure Limits FCC Limits for Maximum Permissible Exposure MPEFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide General Features Multi-Net FeaturesLTR Features Conventional FeaturesControls and Display Front Panel ControlsControls and Display Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation Numeric Display Mode Backlight OperationSystem/Group Display Information Alpha Tag Display Mode Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch ControlStandard Calls IntroductionPlacing a Standard Call Multi-Net and LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Other Special Calls Placing Telephone CallsBusy and Out-Of-Range Conditions Receiving a Telephone Call Placing Other Multi-Net Special CallsReceiving Other Multi-Net Special Calls General Features Landside-Originate CallsBank Select Call Indicator Emergency SwitchEncryption Indicator EncryptionFunction FCN Switch Home System/Group SelectHorn Alert Option Select Power Turn-Off Delay Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerOption Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode Introduction Using Menu ModeMenu Mode and Option Switch Functions SwitchSystem and Group Scan System and Group Scan Single and Multiple Site Scan Scan List ProgrammingScan Delay and Continue Timers Transmitting In The Scan Mode MULTI-NET, LTR, Conventional Modes GeneralConventional Operation Monitoring Conventional Channels Before Transmitting MULTI-NET Features Standard and Special CallsBusy Queuing Multi-Net Roaming Auto-Registration Status Select Mode Selected Status Message Transmitting Status MessagesCaller Identification Calls on Priority and Block ID CodesTransmit Inhibit LTR Features Standard and Telephone CallsBusy Queuing LTR System Search TranspondConventional Features Monitor ModePriority and Block ID Codes Transmit Disable On Busy Receive-Only GroupsTalk-Around Call Guard SquelchPriority Group Sampling Miscellaneous Supervisory TonesMiscellaneous Multi-Net Telephone Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneOperation At Extended Range Preventing Battery Discharge Transceiver ServiceLicensing Miscellaneous