EFJohnson 002-9800-401 manual Quick Reference Guide

Page 9

QUICK REFERENCE GUIDE

QUICK REFERENCE GUIDE

Red - Transmit		System Scan				Group Scan
Amber - Transmit (Reduced Pwr)		List		Encryption		Monitor	List
Green - Busy Conv. Group (Channel)
On-Off/Volume	Select Switch	Phone/ Horn		Scan	Option Call		Priority
(Press/Rotate)	(Press/Rotate)	UID	Alert	Selected			Group

Power On/Off - Press on-off /volume control. Set Volume Level - Rotate on-off/volume control.

Change System or Group - Press Select switch to enable system or group

select mode (indicated by ←/ →or __). Then rotate Select switch to select desired system or group (see page 17).

Select Menu Mode - Press FCN twice then rotate/press Select switch as required to display/select desired parameter (see page 32).

Select Home System/Group - Press FCN then the Select switch.

Scan On/Off - Press SCAN switch. Scan on = , Scanning occurring = scrolling underline (see page 35).

Program System or Group Scan List - Press Select switch to enable system or group programming mode (same as when changing system or group), then press A/D switch. System in list = , Group in list = (see page 37).

Set Squelch Level (Conv. Only) - Press FCN, then rotate Select switch with conventional system selected (see page 18).

Monitor Before Transmitting (Conv. Only) - Take microphone off-hook to enable monitor mode (indicated by ). Channel is busy if indicator is green or someone is talking (see page 42).

9

Image 9

Contents Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Multi-Net Features General FeaturesLTR Features Conventional FeaturesFront Panel Controls Controls and DisplayControls and Display Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation Numeric Display Mode Backlight OperationSystem/Group Display Information Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and GroupSetting Squelch Control Select Mode Indication With Alpha Tag DisplayIntroduction Standard CallsPlacing a Standard Call Multi-Net and LTR OperationReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone Calls Other Special CallsBusy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone CallReceiving Other Multi-Net Special Calls General Features Landside-Originate CallsBank Select Emergency Switch Call IndicatorEncryption Encryption IndicatorFunction FCN Switch Home System/Group SelectHorn Alert Option Select Proceed Clear-To-Talk Tone Power Turn-Off DelayTime-Out Timer Stealth ModeOption Switches Option Switches and Menu ModeTone Select Transmitter Thermal FoldbackUsing Menu Mode Menu Mode IntroductionSwitch Menu Mode and Option Switch FunctionsSystem and Group Scan System and Group Scan Scan List Programming Single and Multiple Site ScanScan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional ModesConventional Operation Monitoring Conventional Channels Before Transmitting MULTI-NET Features Standard and Special CallsBusy Queuing Multi-Net Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status MessageCalls on Priority and Block ID Codes Caller IdentificationTransmit Inhibit LTR Features Standard and Telephone CallsBusy Queuing LTR Transpond System SearchConventional Features Monitor ModePriority and Block ID Codes Receive-Only Groups Transmit Disable On BusyCall Guard Squelch Talk-AroundPriority Group Sampling Supervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Multi-Net Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode MessagesSystem Operator Programming Speaking Into MicrophoneOperation At Extended Range Preventing Battery Discharge Transceiver ServiceLicensing Miscellaneous