EFJohnson 002-9800-401 MULTI-NET Features, Standard and Special Calls, Busy Queuing Multi-Net

Page 43

MULTI-NET FEATURES

Monitor Mode

Selected

MULTI-NET FEATURES

Standard and Special Calls

Standard calls are between two mobiles or between a mobile and a control station, and special calls include telephone, unique ID, and directed group. Standard calls are described starting on page 19, tele- phone calls starting on page 21, and unique ID and directed group calls starting on page 23.

Busy Queuing (Multi-Net)

The Multi-Net Busy Queuing feature places the call in a queue if a busy condition occurs when the PTT switch is pressed. Then when the radio system is no longer busy, a tone sounds and the call can be placed if desired. This feature is enabled on individual Multi-Net systems by dealer programming, and it is then available with all types of calls on that system. This feature operates as follows:

If a busy condition exists, the busy tone sounds and the Busy Queuing mode is entered automatically when the PTT switch is released. The busy tone then stops sounding and “IN QUEUE” is displayed as shown in the following illustration. When the transceiver successfully accesses the system, either a beep or dial tone sounds. The beep sounds

43

Image 43

Contents Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Conventional Features General FeaturesMulti-Net Features LTR FeaturesFront Panel Controls Controls and DisplayControls and Display Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Backlight Operation Numeric Display ModeSystem/Group Display Information Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and GroupSetting Squelch Control Select Mode Indication With Alpha Tag DisplayMulti-Net and LTR Operation Standard CallsIntroduction Placing a Standard CallReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone Calls Other Special CallsBusy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone CallReceiving Other Multi-Net Special Calls Landside-Originate Calls General FeaturesBank Select Emergency Switch Call IndicatorEncryption Encryption IndicatorHome System/Group Select Function FCN SwitchHorn Alert Option Select Proceed Clear-To-Talk Tone Power Turn-Off DelayTime-Out Timer Stealth ModeTransmitter Thermal Foldback Option Switches and Menu ModeOption Switches Tone SelectUsing Menu Mode Menu Mode IntroductionSwitch Menu Mode and Option Switch FunctionsSystem and Group Scan System and Group Scan Scan List Programming Single and Multiple Site ScanScan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional ModesConventional Operation Monitoring Conventional Channels Before Transmitting Standard and Special Calls MULTI-NET FeaturesBusy Queuing Multi-Net Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status MessageCalls on Priority and Block ID Codes Caller IdentificationTransmit Inhibit Standard and Telephone Calls LTR FeaturesBusy Queuing LTR Transpond System SearchMonitor Mode Conventional FeaturesPriority and Block ID Codes Receive-Only Groups Transmit Disable On BusyCall Guard Squelch Talk-AroundPriority Group Sampling Supervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Multi-Net Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingOperation At Extended Range Transceiver Service Preventing Battery DischargeLicensing Miscellaneous