MISCELLANEOUS
PRI ON or OFF - Indicates that priority sampling was just enabled or disabled by the PRI option switch (see page 53).
PRIORTY1 or 2 - Indicates that a
PROG ERR - Indicates an EEPROM read error. Refer to “Transceiver Service” on page 62 for more information.
ROAMING - Indicates that the transceiver is in the process of regis- tering on another system (see “Roaming
SQUELCH - Indicates that the conventional squelch adjust mode is selected (see “Setting Squelch Control” on page 18).
SYS SRCH - Indicates that the LTR System Search mode has been enabled (see page 49).
TA ON or OFF - Indicates that
TIMEOUT - Indicates that the transmitter has been disabled by the
TX DSBL - Indicates that the selected conventional system is programmed for monitoring only (see
TX INHIB - Indicates that the transmitter has been disabled by the Transmit Inhibit feature (see page 47).
UI xxxx - This is the unique ID of the mobile transmitting the message you are receiving (See “Caller Identification” on page 46.)
59