EFJohnson 002-9800-401 manual MULTI-NET, LTR, Conventional Modes, General

Page 40

MULTI-NET, LTR, AND CONVENTIONAL MODES

disabled), the selected system/group is again displayed. Therefore, you can respond to a call without changing the selected system/group as long as you do so before scanning resumes.

Fixed System/Group Transmit in Scan

Each bank can be programmed so that transmissions in the scan mode that are made while scanning is occurring are on a preprogrammed system/group. Note that scanning must be occurring (scrolling underline displayed) when the transmitter is keyed. Since taking the microphone off-hook normally disables scanning (unless off-hook detection is disabled), the transmitter usually must be keyed with the microphone on- hook.

If a transmission occurs under these conditions, the selected system/ group also changes. If the transmitter is keyed with scanning halted, the programming described in the preceding section takes precedence.

MULTI-NET, LTR, AND

CONVENTIONAL MODES

General

Each selectable system can be programmed for Multi-Net, LTR, or conventional operation by your system operator. The type or types of operation that are programmed in your transceiver are determined by the type of radio equipment being used in your radio system. The differences in operation are described in the following information and elsewhere in this manual as required.

Multi-Net and LTR Operation

The Multi-Net mode provides the most operating features. Features available only in the Multi-Net mode include roaming (auto-registration), status messages, and special calls. The two types of calls that can be placed with Multi-Net operation are Standard and Special. Special calls

40

Image 40

Contents Operating Manual Safety Information Page FCC Exposure Limits FCC Limits for Maximum Permissible Exposure MPEFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide General Features Multi-Net FeaturesLTR Features Conventional FeaturesControls and Display Front Panel ControlsControls and Display Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Backlight Operation Numeric Display ModeSystem/Group Display Information Alpha Tag Display Mode Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch ControlStandard Calls IntroductionPlacing a Standard Call Multi-Net and LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Other Special Calls Placing Telephone CallsBusy and Out-Of-Range Conditions Receiving a Telephone Call Placing Other Multi-Net Special CallsReceiving Other Multi-Net Special Calls Landside-Originate Calls General FeaturesBank Select Call Indicator Emergency SwitchEncryption Indicator EncryptionHome System/Group Select Function FCN SwitchHorn Alert Option Select Power Turn-Off Delay Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerOption Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode Introduction Using Menu ModeMenu Mode and Option Switch Functions SwitchSystem and Group Scan System and Group Scan Single and Multiple Site Scan Scan List ProgrammingScan Delay and Continue Timers Transmitting In The Scan Mode MULTI-NET, LTR, Conventional Modes GeneralConventional Operation Monitoring Conventional Channels Before Transmitting Standard and Special Calls MULTI-NET FeaturesBusy Queuing Multi-Net Roaming Auto-Registration Status Select Mode Selected Status Message Transmitting Status MessagesCaller Identification Calls on Priority and Block ID CodesTransmit Inhibit Standard and Telephone Calls LTR FeaturesBusy Queuing LTR System Search TranspondMonitor Mode Conventional FeaturesPriority and Block ID Codes Transmit Disable On Busy Receive-Only GroupsTalk-Around Call Guard SquelchPriority Group Sampling Miscellaneous Supervisory TonesMiscellaneous Multi-Net Telephone Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Menu Mode Messages Bright DIM OFFSpeaking Into Microphone System Operator ProgrammingOperation At Extended Range Transceiver Service Preventing Battery DischargeLicensing Miscellaneous