EFJohnson 002-9800-401 manual Conventional Operation, Receiving a Standard Call

Page 20

STANDARD CALLS

successfully accessed. If it is not enabled, no tone sounds when the system is successfully accessed. The proceed and other tones can be disabled as described in “Tone Select” on page 32.

•If the radio system is busy, the busy tone sounds (see page 54) and “BUSY” is indicated on the lower line of the display. If you continue pressing the PTT switch, the system is accessed when it becomes available. With Multi-Net operation, if Busy Queuing is programmed, the call is automatically placed in a queue when the PTT switch is released (see page 43).

•If an out-of-range condition exists, the intercept tone sounds (see page 54) and “OUT-RNGE” is indicated on the lower line of the display. No more access attempts are made once this indication appears. Release the PTT switch and drive closer to the radio system or away from shielding structures and try again. With Multi-Net operation, if Roaming is programmed (see page 44), the transceiver automatically changes sites before an out-of-range condition occurs.

Conventional Operation

•If the channel is busy and the Transmit Disable On Busy feature is programmed, “DSBL BSY” is indicated on the lower line of the display, the busy tone sounds, and the transmitter is disabled (see page 51).

•Otherwise, busy and out-of-range conditions are not indicated and speaking can begin when the PTT switch is pressed after monitoring the channel. If the proceed tone is enabled on conventional systems, it indicates when speaking can begin but does not indicate that the radio system has been successfully accessed.

5.When the call is complete, place the microphone back on-hook.

Receiving a Standard Call

1.Turn transceiver power on and set the volume as described starting on page 15. With conventional operation, also set the squelch as described on page 18.

20

Image 20

Contents Operating Manual Safety Information Page FCC Exposure Limits FCC Limits for Maximum Permissible Exposure MPEFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide General Features Multi-Net FeaturesLTR Features Conventional FeaturesControls and Display Front Panel ControlsControls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Alpha Tag Display Mode Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch ControlStandard Calls IntroductionPlacing a Standard Call Multi-Net and LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Other Special Calls Placing Telephone CallsBusy and Out-Of-Range Conditions Receiving a Telephone Call Placing Other Multi-Net Special CallsReceiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Call Indicator Emergency SwitchEncryption Indicator EncryptionHorn Alert Function FCN SwitchHome System/Group Select Option Select Power Turn-Off Delay Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerOption Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode Introduction Using Menu ModeMenu Mode and Option Switch Functions SwitchSystem and Group Scan System and Group Scan Single and Multiple Site Scan Scan List ProgrammingScan Delay and Continue Timers Transmitting In The Scan Mode MULTI-NET, LTR, Conventional Modes GeneralConventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Status Select Mode Selected Status Message Transmitting Status MessagesCaller Identification Calls on Priority and Block ID CodesTransmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls System Search TranspondPriority and Block ID Codes Conventional FeaturesMonitor Mode Transmit Disable On Busy Receive-Only GroupsTalk-Around Call Guard SquelchPriority Group Sampling Miscellaneous Supervisory TonesMiscellaneous Multi-Net Telephone Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Menu Mode Messages Bright DIM OFFOperation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous