EFJohnson 002-9800-401 manual Conventional Features, Priority and Block ID Codes, Monitor Mode

Page 50

CONVENTIONAL FEATURES

a call is received on one of these groups, the transceiver automatically transmits a response. This causes the transceiver placing the call to briefly unsquelch and the call indicator to turn on (if it is programmed on the selected group).

Priority and Block ID Codes

LTR priority and block ID codes function nearly the same with both LTR and Multi-Net operation. Therefore, refer to the Multi-Net descrip- tion on page 46.

Transmit Inhibit

The Transmit Inhibit function operates the same with both LTR and Multi-Net operation. Therefore, refer to the Multi-Net description on page 47.

CONVENTIONAL FEATURES

Monitor Mode

The monitor mode is used to monitor a channel before transmitting. When this mode is selected, it temporarily disables Call Guard squelch or other squelch control techniques and also scanning so that all messages occurring on the selected group (channel) are heard. The monitor mode is enabled by taking the microphone off-hook (unless off-hook detection is disabled by programming) or pressing the MON option switch. The monitor mode is indicated by in the display.

A conventional system must be selected to enable monitoring. If the microphone is taken off-hook with a Multi-Net or LTR system selected, scanning halts (unless off-hook detection is disabled) but monitoring is not selected. The MON option switch is not detected when scanning is enabled, and if it is pressed with a Multi-Net or LTR system selected, NOT CONV is displayed and monitoring is not selected. This switch must be pressed again to disable the monitor mode.

50

Image 50

Contents Operating Manual Safety Information Page FCC Exposure Limits FCC Limits for Maximum Permissible Exposure MPEFrequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide LTR Features General FeaturesMulti-Net Features Conventional FeaturesControls and Display Front Panel ControlsControls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Alpha Tag Display Mode Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch ControlPlacing a Standard Call Standard CallsIntroduction Multi-Net and LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Other Special Calls Placing Telephone CallsBusy and Out-Of-Range Conditions Receiving a Telephone Call Placing Other Multi-Net Special CallsReceiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Call Indicator Emergency SwitchEncryption Indicator EncryptionHorn Alert Function FCN SwitchHome System/Group Select Option Select Power Turn-Off Delay Proceed Clear-To-Talk ToneStealth Mode Time-Out TimerTone Select Option Switches and Menu ModeOption Switches Transmitter Thermal FoldbackMenu Mode Introduction Using Menu ModeMenu Mode and Option Switch Functions SwitchSystem and Group Scan System and Group Scan Single and Multiple Site Scan Scan List ProgrammingScan Delay and Continue Timers Transmitting In The Scan Mode MULTI-NET, LTR, Conventional Modes GeneralConventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Status Select Mode Selected Status Message Transmitting Status MessagesCaller Identification Calls on Priority and Block ID CodesTransmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls System Search TranspondPriority and Block ID Codes Conventional FeaturesMonitor Mode Transmit Disable On Busy Receive-Only GroupsTalk-Around Call Guard SquelchPriority Group Sampling Miscellaneous Supervisory TonesMiscellaneous Multi-Net Telephone Call Tones LTR Telephone Call TonesDisplay Messages Miscellaneous Miscellaneous Menu Mode Messages Bright DIM OFFOperation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous