Frymaster H17SC 8.5.2 FPH217/317 Multiple Battery Filtration System Components cont, Standard

8.5.2FPH217/317 Multiple Battery Filtration System Components (cont.)

ITEM		STANDARD		EURO-LOOK		COMPONENT
		PART #		PART #
*	826-1979				Filter Pan Roller Kit (four each of Items 7 and 8)
*	826-1980				Service Filter Pan (Item 5 minus Item 2)
*	826-1981				Service Filter Pan Assembly (Service Filter Pan above plus Items 3 & 4)
*	826-1392				O-Ring (Pkg. of 5; used with Item 5)
*	813-0568				Plug, ⅛-inch Socket Head Pipe (component of Item 5; two required)
*	811-1071				Tubing, ¼-inch OD Teflon Vent (sold by the foot)
*		806-5933SP			Heater Strip Assembly, 120V 18” 25W
1	823-4637		823-4787		Lid (for units built before Feb 04, use 823-4391)
2	810-2743				Crumb Tray (component of Item 5)
3	810-2091				Hold Down Ring
4	200-2124				SanaGrid Filter Screen
5		106-2617SP			Pan, One-Piece Filter (includes Item 2 and o-rings)
6	810-2012				Rail Set, Filter Pan Roller (includes one left and one right)
7	810-2198				Roller, Filter Pan and Rail
8	826-1372				Nut, ¼-20 Hex (Pkg. of 10)
9	823-4589		823-4675		Bracket, Lid Support (for units built before Feb 04, use 823-3875)
10	200-3556				Guide, Filter Pan Lid
11	809-0104		809-0503		Screw, 8-32 X ½-inch Slotted Truss Head
12	809-0247				Nut, 8-32 Hex Keps
13	823-3879				Suction Tube
14	200-4408				Rail, Left Filter
15	200-4409				Rail, Right Filter
16	826-1712				Kit, Motor and Gasket 115V 60Hz (807-3859 Motor)
17	826-1264				Pump and Gasket Kit
18	807-2484				Valve, ¼-inch Solenoid
19	813-0165				Elbow, ½-inch 90° Street
20	813-0342				Elbow, ½-inch 45° Street
21	813-0530				Tee, ½-inch X ¼-inch X ½-inch Reducing
22	813-0022				Nipple, ½-inch Close
23	813-0838				Nipple, ¼-inch Close
24	813-0304				Bushing, ½-inch to ¼-inch Flush
25	810-1668				Adapter, ⅝-inch to ½-inch NPT Male
26	810-1669				Adapter, ⅝-inch to ½-inch NPT Female
27	810-1159				Flexline, 5.0-inch Oil Return
28	810-1369				Flexline, 17.5-inch Oil Return
29	810-1055				Flexline, 11.5-inch Oil Return
30	807-3828				Cable, FootPrint Pro Pump Motor
31	826-1375				Screw, 10-32 X ¾-inch Hex Trim Head (Pkg. of 5)
32	200-5950				Bridge, Filter Motor
33	210-3149				Support, Contactor Box
34	813-0003				Tee, ½-Inch
35	813-0298				Nipple, ½-inch 2.0-inch
36	813-0537				Nipple, ¼-inch 2.0-inch
37	810-2493				Fitting, ¼-inch X 90° Quick-Connect
38	810-1160				Flexline, 3.0-inch Oil Return
*			810-1043		Flexline, 9.5-inch Oil Return
*			810-1057		Flexline, 13.0-inch Oil Return
* Not illustrated.							Use standard part.

8-24