Jenn-Air JGS8860BD, JGS9900BD Electric Supply, All Ranges can TIP and Cause Injuries to Persons

Page 33

Installation Instructions

Jenn-Air Updraft Gas Slide-In Range

I N S T A L L A T I O N I N S T R U C T I O N S

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

This manual is intended to assist in the initial installation and adjustments of the range.

•Only qualified personnel should install or service this range.

•Read “Safety Instructions” in Use & Care book before using range.

•Improper installation, adjustment, alteration, service, maintenance or use of range can result in serious injury or property damage.

•Installer, take care not to damage flooring.

C A U T I O N S

Do not lift or move range by grasping door handles or main top.

This range has been designed in accordance with the requirements of various safety agencies and complies with the maximum allowable wood cabinet temperatures of 194˚F. If this range is installed with cabinets that have a lower working temperature than 194˚F, discoloration, delamination or melting may occur.

Place range in a well lit area. Do not set range over holes in the floor or other locations where it may be subject to strong drafts. Any opening in the wall behind the range and in the floor under the range should be sealed. Make sure the flow of cooling/ventilation air is not obstructed below the range. Note: A range should NOT be installed over kitchen carpeting.

High Altitude Notice: The specified gas burner ratings typically apply to elevations up to 2000 feet. For higher altitudes, the rates may need to be reduced to achieve satisfactory operation. A local certified gas servicer will be able to advise if a reduction is necessary.

W A R N I N G

Electrical Grounding Instructions – This appliance is equipped with a (three-prong) grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

CONNECTING THE RANGE

Electric Supply

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70. In Canada the range must be installed in accordance with the current CSA Standard C22.1 - Canadian Electrical Code Part 1.

W A R N I N G

•All RANGES CAN TIP AND CAUSE INJURIES TO PERSONS.

•INSTALL ANTI-TIP DEVICES PACKED WITH RANGE.

•FOLLOW ALL INSTALLATION INSTRUCTIONS.

A risk of range tip-over exists if the appliance is not installed in accordance with the provided installation instructions. The proper use of the ANTI-TIP device minimizes the risk of TIP-OVER. In using this device the consumer must still observe the safety precautions as stated in the USE and CARE MANUAL and avoid using the oven doors as a step stool. Installation instructions are provided for wood and cement in either floor or wall. Any other type of construction may require special installation techniques as deemed necessary to provide adequate fastening of the ANTI-TIP bracket to the floor or wall. The bracket must be installed to engage the RIGHT rear leveling foot. Install the bracket as shown in step 2.

MOBILE HOMES

The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations ANSI A225.1/NFPA 501A, or with local codes. In Canada the range must be installed in accordance with the current CSA Standard C22.1 - Canadian Electrical Code Part 1 and Section Z240.4.1

-Installation Requirements for Gas Burning Appliances in Mobil Homes (CSA Standard CAN/CSA - Z240MH).

RECREATIONAL PARK TRAILERS

The installation of a range designed for recreational park trailers must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5-latest edition. In Canada the range must be installed in accordance with CAN/CSA - Z240.6.2 - Electrical Requirements for R.V.’s (CSA Standard CAN/CSA - Z240 RV Series) and Section Z240.4.2 - Installation Requirements for Propane Appliances and Equipment in R.V.’s (CSA Standard CAN/CSA - Z240 RV Series).

Electrical Supply Connection

The range requires 120 volts, 60 cycle alternating current from a dedicated grounded outlet with a 15 amp circuit breaker. See serial plate for rating, located on front frame behind storage drawer. User may experience occasional circuit tripping if Ground Fault Circuit Interrupter (GFCI) outlet or breaker is in use.

© 2006 Maytag Services

16026923

A – 3

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Service Important Information Customer Service Support CenterTable of Contents Servicing Safety Practices for ServicerReceiving Oven Using the OvenProduct Safety Devices Connecting Range to GasBaking, Broiling, and Roasting Electrical RequirementsGeneral Information Placement of the Oven SpecificationsService Parts and AccessoriesGrounding ArningRange Description Troubleshooting Procedures Burner, but burner does not Control-Related Error not measurable Description of Fault Codes for EOCOven Sensor, Meat Probe and Cooling Fan Temperature Charts Gas on Illustration Component Test Procedure ResultsGas OFF Factory set to Natural GasJGS8850BD Control Component Test Procedure Illustration Component Test ProcedurePad Results Trace MeasurementPad Trace Control Component Test Procedure Pad ResultsSabbath Mode Oven Temperature AdjustmentClock & Day Display Disable 208/240 V SettingTimers Tones Feature Access Procedure Tone OptionsVolume Energy Saver ModeRelay Logic for EOC Quick Test Mode for EOC Description of Fault Codes for EOC Maintop Assembly Removal Select Models Cartridge Assembly Removal Select ModelsTop Burner Assembly Removal Select Models Lower Burner Assembly Removal Select ModelsManifold Assembly Removal Spark Module ReplacementBurner Switch Replacement Control Panel Assembly RemovalOven Sensor Replacement Cooling Fan ReplacementConvection Element Replacement Select Models Bake Burner and Ignitor RemovalOven Hi-Limit Thermostat Replacement Oven Light Bulb/Oven Light Socket ReplacementRegulator Removal Gas Valve Removal Select ModelsStorage Drawer Track Disassembly Select Models Oven Door Latch ReplacementStorage Drawer Disassembly Bottom Access Panel Removal Select ModelsWarming Drawer Track Disassembly Select Models Warming Drawer Hi-Limit Switch Replacement Select ModelsWarming Drawer Disassembly Oven Door DisassemblyOven Door, Warming Drawer Storage Drawer and Access Panel DisassemblyAppendix a Jenn-Air Updraft Gas Slide-In Range Electric Supply All Ranges can TIP and Cause Injuries to PersonsElectrical Supply Connection Follow these procedures to remove appliance for servicing Gas SupplyCheck Pressure of House Piping System Clearance Dimensions Dégagements Dimensions/Dimensions/Dimensiones Use Lappareil Gas/À gaz/Gas Electric/Électrique/Eléctrica Appendix B USE & Care Guide Setting the controls Operating During a Power FailureSurface Controls Pilotless IgnitionSealed Burners CooktopHigh Performance Burner Low Turn Down BurnerVentilation System Care and Cleaning Ventilation SystemControl Panel Setting the ClockQuickset Pads ClockLocking the Control and Oven Door TimersConvect BakingBake Options Convect OptionsConvect Bake Convect RoastRapid Preheat Broiling Chart BroilTo set Broil More Options DelayCook & Hold ProofingMeat Probe Keep WarmTo select a recipe from the preset Recipe List Suggested Internal Food TemperaturesFavorites To Save the Last Recipe CompletedSetup LanguageAuto Convect Conversion Temp Adjust Sabbath ModeTo change the timer beeps To adjust the beepsTo change the volume of the beeps To turn off this featureAppendix C LP Propane Conversion Noir 27A Correct LP Propane Conversion Flip the regulator cap and replace the plastic Usted Debe iniciar el enroscado de las Reverse steps 6 through To reassemble oven30A 31A Correct BON Correcto Gas Conversion Instructions, JGS8850BD*, JGS8860BD Gas Conversion Instructions, JGS9900BD #50 42mm27 a Jaune Correct BON Correcto

JGS9900BD, JGS8860BD, JGS8850BD, JGS8750BD specifications

The Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD are a series of high-performance gas cooktops designed for culinary enthusiasts who value precision and sophistication. These models are distinguished by their robust construction, modern aesthetics, and a range of innovative features that streamline the cooking process.

One of the key features across these models is the professional-grade burners. The JGS8750BD, for instance, boasts a powerful 20,000 BTU burner, perfect for high-heat searing and rapid boiling. In contrast, the JGS8850BD offers a versatile 15,000 BTU burner, catering to a variety of cooking needs, including simmering and sautéing. For more delicate tasks, the JGS8860BD showcases a 5,000 BTU burner designed for simmering sauces and cooking delicate dishes with precision.

Another notable characteristic of these cooktops is the incorporation of the Jenn-Air® Turbo Flame™ technology. This feature provides an exceptional level of control, allowing chefs to achieve the desired temperature with accuracy. This technology is particularly valuable for those who require consistent heat for intricate recipes and techniques.

The seamless stainless-steel design not only elevates the appearance of any kitchen but also offers easy cleaning and maintenance. The high-quality grates found on these models are designed for durability and stability, ensuring pots and pans remain securely in place during cooking. Additionally, the continuous surface grates facilitate effortless sliding of cookware from one burner to another.

The JGS9900BD stands out with its advanced electronic ignition system, which ensures that the burners ignite quickly and reliably, minimizing downtime in the kitchen. Safety is also a priority across these models, featuring flame failure detection that automatically shuts off the gas supply if a flame goes out.

In terms of size, these cooktops cater to different kitchen configurations, with varying configurations to suit individual preferences and space constraints. Whether you're an avid home cook or a professional chef, the Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD combine superior technology with elegant design, making them a valuable addition to any modern kitchen. This series exemplifies Jenn-Air's commitment to quality, performance, and aesthetics, ensuring an elevated cooking experience for all users.
Top Page Image Contents