Jenn-Air JGS8850BD manual Surface Controls, Pilotless Ignition, Operating During a Power Failure

Page 43

Use & Care

SURFACE COOKING

Low: Use to simmer foods, keep foods warm and melt chocolate or butter. Some cooking may take place on the Low setting if the pan is covered. It is possible to reduce the heat by rotating the knob toward OFF. Be sure flame is stable.

High: Use to bring liquid to a boil, or reach pressure in a pressure cooker. Always reduce setting to a lower heat when liquids begin to boil or foods begin to cook.

An intermediate flame size is used to continue cooking. Food will not cook any faster when a higher flame setting is used than needed to maintain a gentle boil. Water boils at the same temperature whether boiling gently or vigorously.

Surface Controls

CAUTION

•If flame should go out during a cooking operation and the burner does not reignite itself, turn the burner off. If a strong gas odor is detected, open a window and wait five minutes before relighting the burner.

•Be sure all surface controls are set in the OFF position prior to supplying gas to the range.

•NEVER touch cooktop until it has cooled. Expect some parts of the cooktop, especially around the burners, to become warm or hot during cooking. Use potholders to protect hands.

Pilotless Ignition

Pilotless ignition eliminates the need for a constant standing pilot light. Each surface burner has a spark ignitor. Use care when cleaning around the surface burner.

If the surface burner does not light, check if ignitor is broken, soiled or wet.

Setting the controls:

The size and type of cookware will affect the heat setting.

1.Place a pan on the burner grate.

•The burner flame may lift off or appear separated from the port if a pan is not placed on the grate.

2.Push in and turn the knob to the desired setting.

•A clicking (spark) sound will be heard and the burner will light.

Important: Each surface burner is equipped to provide automatic reignition if the flame should somehow get blown out.

Operating During a

Power Failure

CAUTION

When lighting the surface burners, be sure all of the controls are in the OFF position. Strike the match first and hold it in position before turning the knob on.

1.Hold a lighted match to the desired surface burner head.

2.Push in and turn the control knob slowly on.

3.Adjust the flame to the desired level.

Surface Control Knobs

Use to turn on the surface burners. An infinite choice of heat settings is available from Low to High. At the High setting a detent or notch may be felt. The knobs can be set on or between any of the settings.

Graphics next to the knob identify which burner the knob controls. For example, the graphic at left shows the right front burner location.

© 2006 Maytag Services

16026923

B – 3

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Service Important Information Customer Service Support CenterTable of Contents Servicing Safety Practices for ServicerReceiving Oven Using the OvenElectrical Requirements Connecting Range to GasProduct Safety Devices Baking, Broiling, and RoastingGeneral Information Parts and Accessories SpecificationsPlacement of the Oven ServiceGrounding ArningRange Description Troubleshooting Procedures Burner, but burner does not Control-Related Error not measurable Description of Fault Codes for EOCOven Sensor, Meat Probe and Cooling Fan Temperature Charts Factory set to Natural Gas Illustration Component Test Procedure ResultsGas on Gas OFFJGS8850BD Results Trace Measurement Illustration Component Test ProcedureControl Component Test Procedure PadPad Trace Control Component Test Procedure Pad Results208/240 V Setting Oven Temperature AdjustmentSabbath Mode Clock & Day Display DisableEnergy Saver Mode Feature Access Procedure Tone OptionsTimers Tones VolumeRelay Logic for EOC Quick Test Mode for EOC Description of Fault Codes for EOC Lower Burner Assembly Removal Select Models Cartridge Assembly Removal Select ModelsMaintop Assembly Removal Select Models Top Burner Assembly Removal Select ModelsControl Panel Assembly Removal Spark Module ReplacementManifold Assembly Removal Burner Switch ReplacementBake Burner and Ignitor Removal Cooling Fan ReplacementOven Sensor Replacement Convection Element Replacement Select ModelsGas Valve Removal Select Models Oven Light Bulb/Oven Light Socket ReplacementOven Hi-Limit Thermostat Replacement Regulator RemovalBottom Access Panel Removal Select Models Oven Door Latch ReplacementStorage Drawer Track Disassembly Select Models Storage Drawer DisassemblyOven Door Disassembly Warming Drawer Hi-Limit Switch Replacement Select ModelsWarming Drawer Track Disassembly Select Models Warming Drawer DisassemblyOven Door, Warming Drawer Storage Drawer and Access Panel DisassemblyAppendix a Jenn-Air Updraft Gas Slide-In Range All Ranges can TIP and Cause Injuries to Persons Electric SupplyElectrical Supply Connection Gas Supply Follow these procedures to remove appliance for servicingCheck Pressure of House Piping System Clearance Dimensions Dégagements Dimensions/Dimensions/Dimensiones Use Lappareil Gas/À gaz/Gas Electric/Électrique/Eléctrica Appendix B USE & Care Guide Pilotless Ignition Operating During a Power FailureSetting the controls Surface ControlsLow Turn Down Burner CooktopSealed Burners High Performance BurnerVentilation System Care and Cleaning Ventilation SystemClock Setting the ClockControl Panel Quickset PadsLocking the Control and Oven Door TimersConvect Options BakingConvect Bake OptionsConvect Roast Convect BakeRapid Preheat Broil Broiling ChartTo set Broil Proofing DelayMore Options Cook & HoldMeat Probe Keep WarmTo Save the Last Recipe Completed Suggested Internal Food TemperaturesTo select a recipe from the preset Recipe List FavoritesLanguage SetupAuto Convect Conversion Temp Adjust Sabbath ModeTo turn off this feature To adjust the beepsTo change the timer beeps To change the volume of the beepsAppendix C LP Propane Conversion Noir 27A Correct LP Propane Conversion Flip the regulator cap and replace the plastic Usted Debe iniciar el enroscado de las Reverse steps 6 through To reassemble oven30A 31A Correct BON Correcto Gas Conversion Instructions, JGS8850BD*, JGS8860BD Gas Conversion Instructions, JGS9900BD #50 42mm27 a Jaune Correct BON Correcto

JGS9900BD, JGS8860BD, JGS8850BD, JGS8750BD specifications

The Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD are a series of high-performance gas cooktops designed for culinary enthusiasts who value precision and sophistication. These models are distinguished by their robust construction, modern aesthetics, and a range of innovative features that streamline the cooking process.

One of the key features across these models is the professional-grade burners. The JGS8750BD, for instance, boasts a powerful 20,000 BTU burner, perfect for high-heat searing and rapid boiling. In contrast, the JGS8850BD offers a versatile 15,000 BTU burner, catering to a variety of cooking needs, including simmering and sautéing. For more delicate tasks, the JGS8860BD showcases a 5,000 BTU burner designed for simmering sauces and cooking delicate dishes with precision.

Another notable characteristic of these cooktops is the incorporation of the Jenn-Air® Turbo Flame™ technology. This feature provides an exceptional level of control, allowing chefs to achieve the desired temperature with accuracy. This technology is particularly valuable for those who require consistent heat for intricate recipes and techniques.

The seamless stainless-steel design not only elevates the appearance of any kitchen but also offers easy cleaning and maintenance. The high-quality grates found on these models are designed for durability and stability, ensuring pots and pans remain securely in place during cooking. Additionally, the continuous surface grates facilitate effortless sliding of cookware from one burner to another.

The JGS9900BD stands out with its advanced electronic ignition system, which ensures that the burners ignite quickly and reliably, minimizing downtime in the kitchen. Safety is also a priority across these models, featuring flame failure detection that automatically shuts off the gas supply if a flame goes out.

In terms of size, these cooktops cater to different kitchen configurations, with varying configurations to suit individual preferences and space constraints. Whether you're an avid home cook or a professional chef, the Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD combine superior technology with elegant design, making them a valuable addition to any modern kitchen. This series exemplifies Jenn-Air's commitment to quality, performance, and aesthetics, ensuring an elevated cooking experience for all users.
Top Page Image Contents