Jenn-Air JGS8850BD, JGS9900BD, JGS8860BD, JGS8750BD manual Timers, Locking the Control and Oven Door

Page 47

Use & Care

Activating and canceling the clock/day of week display:

1. Press Setup pad.

2.Select CLOCK.

3.Press the arrow to scroll until DISABLE is displayed.

4.Select DISABLE.

5.Select TIME.

6.Select OFF to turn the clock display off, or select ON to turn the clock display on.

7.Select OFF to turn the day of the week display off. Select ON to turn the weekday display on.

8.To exit the Setup mode, press Setup pad.

Entering the day of the week:

1.Press Setup pad.

2.Select CLOCK.

3.Press the arrow to scroll until DAY is displayed.

4.Use Quickset arrow to scroll through the days.

5.Select day desired.

6.To exit the Setup mode, press Setup pad.

To set the clock for a 12 or 24 hour format:

The clock can be set to display time in either a 12 hour or 24 hour format.

1. Press the Setup pad.

2.Select CLOCK.

3.Use the arrow to scroll to the next screen.

4.Select 12/24 HOUR.

5.Select 12 HR or 24 HR.

6.To exit Setup mode, press Setup pad.

Timers

Setting the Timers (Timer 1 or Timer 2):

1.Press TIMER 1 or TIMER 2 pad.

2. Press one of the displayed times using the Quickset pads, or press the number pads to enter the desired time.

Important: Each press of the displayed time choices adds additional time. For example, pressing “10 MIN” three times provides 30 minutes on the timer (0:30).

3. Press Enter pad.

Changing the amount of time entered once the Timer starts:

1. Press the TIMER 1 or TIMER 2 pad once.

2.Press the displayed times on the Quickset

pads repeatedly until the desired time is entered.

OR

3.Press the number pads to enter the new desired time.

4.Press Enter pad.

Canceling the Timer:

1. Press the TIMER 1 or TIMER 2 pad twice.

If both Timers are active:

If the desired Timer is already in the foreground, press once for edit mode and twice to cancel the Timer. If the desired Timer is not in the foreground, follow the steps below.

1.Press the desired TIMER pad once. The selected Timer will come to the foreground.

2.Press the TIMER pad a second time to access the edit mode in order to make changes.

3.Pressing the TIMER pad a third time will cancel the Timer.

Changing the Timer beeps:

The signal beeps for TIMER 1 and TIMER 2 can be changed. The options available are two beeps every thirty seconds, two beeps every sixty seconds or one beep only. The default setting is one beep.

1. Press the Setup pad.

2. Select the arrow to scroll until TONES is displayed.

3.Select TONES.

4.Select TIMERS TONES.

5.Select the desired timer beep format (2-30 SEC, 2-60 SEC or 1 BEEP).

6.Press Setup pad to exit Setup mode.

Locking the Control and Oven Door

The oven control and oven door can be locked to prevent accidental programming. If an oven function is currently being used, the control and door cannot be locked.

To lock the control and door:

Press the Back and Enter pads at the same time, holding for three seconds or until CONTROL LOCKED appears in the display.

To unlock the control and door:

Press the Back and Enter pads at the same time, holding for three seconds. UNLOCKING DOOR will appear in the display when the control and door are unlocking.

© 2006 Maytag Services

16026923

B – 7

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Service Important Information Customer Service Support CenterTable of Contents Servicing Safety Practices for ServicerReceiving Oven Using the OvenElectrical Requirements Connecting Range to GasProduct Safety Devices Baking, Broiling, and RoastingGeneral Information Parts and Accessories SpecificationsPlacement of the Oven ServiceGrounding ArningRange Description Troubleshooting Procedures Burner, but burner does not Control-Related Error not measurable Description of Fault Codes for EOCOven Sensor, Meat Probe and Cooling Fan Temperature Charts Factory set to Natural Gas Illustration Component Test Procedure ResultsGas on Gas OFFJGS8850BD Results Trace Measurement Illustration Component Test ProcedureControl Component Test Procedure PadPad Trace Control Component Test Procedure Pad Results208/240 V Setting Oven Temperature AdjustmentSabbath Mode Clock & Day Display DisableEnergy Saver Mode Feature Access Procedure Tone OptionsTimers Tones VolumeRelay Logic for EOC Quick Test Mode for EOC Description of Fault Codes for EOC Lower Burner Assembly Removal Select Models Cartridge Assembly Removal Select ModelsMaintop Assembly Removal Select Models Top Burner Assembly Removal Select ModelsControl Panel Assembly Removal Spark Module ReplacementManifold Assembly Removal Burner Switch ReplacementBake Burner and Ignitor Removal Cooling Fan ReplacementOven Sensor Replacement Convection Element Replacement Select ModelsGas Valve Removal Select Models Oven Light Bulb/Oven Light Socket ReplacementOven Hi-Limit Thermostat Replacement Regulator RemovalBottom Access Panel Removal Select Models Oven Door Latch ReplacementStorage Drawer Track Disassembly Select Models Storage Drawer DisassemblyOven Door Disassembly Warming Drawer Hi-Limit Switch Replacement Select ModelsWarming Drawer Track Disassembly Select Models Warming Drawer DisassemblyOven Door, Warming Drawer Storage Drawer and Access Panel DisassemblyAppendix a Jenn-Air Updraft Gas Slide-In Range Electrical Supply Connection Electric SupplyAll Ranges can TIP and Cause Injuries to Persons Check Pressure of House Piping System Follow these procedures to remove appliance for servicingGas Supply Clearance Dimensions Dégagements Dimensions/Dimensions/Dimensiones Use Lappareil Gas/À gaz/Gas Electric/Électrique/Eléctrica Appendix B USE & Care Guide Pilotless Ignition Operating During a Power FailureSetting the controls Surface ControlsLow Turn Down Burner CooktopSealed Burners High Performance BurnerVentilation System Care and Cleaning Ventilation SystemClock Setting the ClockControl Panel Quickset PadsLocking the Control and Oven Door TimersConvect Options BakingConvect Bake OptionsRapid Preheat Convect BakeConvect Roast To set Broil Broiling ChartBroil Proofing DelayMore Options Cook & HoldMeat Probe Keep WarmTo Save the Last Recipe Completed Suggested Internal Food TemperaturesTo select a recipe from the preset Recipe List FavoritesAuto Convect Conversion SetupLanguage Temp Adjust Sabbath ModeTo turn off this feature To adjust the beepsTo change the timer beeps To change the volume of the beepsAppendix C LP Propane Conversion Noir 27A Correct LP Propane Conversion Flip the regulator cap and replace the plastic Usted Debe iniciar el enroscado de las Reverse steps 6 through To reassemble oven30A 31A Correct BON Correcto Gas Conversion Instructions, JGS8850BD*, JGS8860BD Gas Conversion Instructions, JGS9900BD #50 42mm27 a Jaune Correct BON Correcto

JGS9900BD, JGS8860BD, JGS8850BD, JGS8750BD specifications

The Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD are a series of high-performance gas cooktops designed for culinary enthusiasts who value precision and sophistication. These models are distinguished by their robust construction, modern aesthetics, and a range of innovative features that streamline the cooking process.

One of the key features across these models is the professional-grade burners. The JGS8750BD, for instance, boasts a powerful 20,000 BTU burner, perfect for high-heat searing and rapid boiling. In contrast, the JGS8850BD offers a versatile 15,000 BTU burner, catering to a variety of cooking needs, including simmering and sautéing. For more delicate tasks, the JGS8860BD showcases a 5,000 BTU burner designed for simmering sauces and cooking delicate dishes with precision.

Another notable characteristic of these cooktops is the incorporation of the Jenn-Air® Turbo Flame™ technology. This feature provides an exceptional level of control, allowing chefs to achieve the desired temperature with accuracy. This technology is particularly valuable for those who require consistent heat for intricate recipes and techniques.

The seamless stainless-steel design not only elevates the appearance of any kitchen but also offers easy cleaning and maintenance. The high-quality grates found on these models are designed for durability and stability, ensuring pots and pans remain securely in place during cooking. Additionally, the continuous surface grates facilitate effortless sliding of cookware from one burner to another.

The JGS9900BD stands out with its advanced electronic ignition system, which ensures that the burners ignite quickly and reliably, minimizing downtime in the kitchen. Safety is also a priority across these models, featuring flame failure detection that automatically shuts off the gas supply if a flame goes out.

In terms of size, these cooktops cater to different kitchen configurations, with varying configurations to suit individual preferences and space constraints. Whether you're an avid home cook or a professional chef, the Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD combine superior technology with elegant design, making them a valuable addition to any modern kitchen. This series exemplifies Jenn-Air's commitment to quality, performance, and aesthetics, ensuring an elevated cooking experience for all users.
Top Page Image Contents