Jenn-Air JGS8750BD manual Baking, Broiling, and Roasting, Connecting Range to Gas, Extension Cord

Page 6

Important Safety Information

!CAUTION

Regulator must be set for the type of gas being

Do not store items of interest to children in cabinets above range. Children may climb on oven to reach these items and become seriously injured.

Baking, Broiling, and Roasting

Do not use oven area for storage.

Stand back from range when opening door of a hot oven. Hot air or steam can cause burns to hands, face, and eyes.

Do not use aluminum foil anywhere in the oven. This could result in a fire hazard and damage the range.

Use only glass cookware appropriate for use in gas ovens.

Always remove broiler pan from oven when finished broiling. Grease left in pan can catch fire if oven is used without removing grease from the broiler pan.

When broiling, meat that is close to the flame, may ignite. Trim any excess fat to help prevent excessive flare-ups.

Make sure broiler pan is placed correctly to reduce any possibility of grease fires.

Should a grease fire occur in the broiler pan, turn off oven, and keep oven door closed until fire burns out.

Connecting Range to Gas

Install manual shut-off valve in gas line for easy accessibility outside range. Be aware of the location of the shut-off valve.

Electrical Requirements

Gas Burner Orifices

Oven Safety Valve

Grounded Oven Frame

used Natural or LP. After servicing regulator, make certain it is set properly before completing service.

Universal orifices are used on most valves. They must be adjusted for the type of gas being used Natural or LP. After servicing a valve or orifice verify it is adjusted properly before completing service.

Oven valve is designed to be a safety valve. Two basic designs are used in gas ranges:

Hydraulic and Electric

Both types are safety valves because they are indirectly operated by the oven thermostat, which controls a pilot flame or electric ignitor, to open and close the oven valve.

Ground prong on power cord is connected to the

120-volt, 60 Hertz, 20 amp, individual circuit which is properly grounded, polarized and protected by a circuit breaker or fuse.

Extension Cord

Do not use extension cords with this product.

Product Safety Devices

Safety devices and features have been engineered into the product to protect consumer and servicer. Safety devices must never be removed, bypassed, or altered in such a manner as to defeat the purpose for which they were intended.

Listed below are various safety devices together with the reason each device is incorporated in the gas ranges.

Pressure Regulator

Maintains proper and

 

steady gas pressure for

 

operation of oven

 

controls.

6

16026923

frame, usually a green lead fastened by a screw. In addition, any part or component capable of conducting an electric current is grounded by its mounting.

If any ground wire, screw, strap, nut, etc. is removed for service, or any reason, it must be reconnected to its original position with original fastener before the appliance is put into operation again.

Failure to do so can create a possible shock hazard.

© 2006 Maytag Services

Image 6
Contents Service Customer Service Support Center Important InformationTable of Contents Safety Practices for Servicer ServicingUsing the Oven Receiving OvenBaking, Broiling, and Roasting Connecting Range to GasProduct Safety Devices Electrical RequirementsGeneral Information Service SpecificationsPlacement of the Oven Parts and AccessoriesArning GroundingRange Description Troubleshooting Procedures Burner, but burner does not Description of Fault Codes for EOC Control-Related Error not measurableOven Sensor, Meat Probe and Cooling Fan Temperature Charts Gas OFF Illustration Component Test Procedure ResultsGas on Factory set to Natural GasJGS8850BD Pad Illustration Component Test ProcedureControl Component Test Procedure Results Trace MeasurementControl Component Test Procedure Pad Results Pad TraceClock & Day Display Disable Oven Temperature AdjustmentSabbath Mode 208/240 V SettingVolume Feature Access Procedure Tone OptionsTimers Tones Energy Saver ModeRelay Logic for EOC Quick Test Mode for EOC Description of Fault Codes for EOC Top Burner Assembly Removal Select Models Cartridge Assembly Removal Select ModelsMaintop Assembly Removal Select Models Lower Burner Assembly Removal Select ModelsBurner Switch Replacement Spark Module ReplacementManifold Assembly Removal Control Panel Assembly RemovalConvection Element Replacement Select Models Cooling Fan ReplacementOven Sensor Replacement Bake Burner and Ignitor RemovalRegulator Removal Oven Light Bulb/Oven Light Socket ReplacementOven Hi-Limit Thermostat Replacement Gas Valve Removal Select ModelsStorage Drawer Disassembly Oven Door Latch ReplacementStorage Drawer Track Disassembly Select Models Bottom Access Panel Removal Select ModelsWarming Drawer Disassembly Warming Drawer Hi-Limit Switch Replacement Select ModelsWarming Drawer Track Disassembly Select Models Oven Door DisassemblyStorage Drawer and Access Panel Disassembly Oven Door, Warming DrawerAppendix a Jenn-Air Updraft Gas Slide-In Range Electric Supply All Ranges can TIP and Cause Injuries to PersonsElectrical Supply Connection Follow these procedures to remove appliance for servicing Gas SupplyCheck Pressure of House Piping System Clearance Dimensions Dégagements Dimensions/Dimensions/Dimensiones Use Lappareil Gas/À gaz/Gas Electric/Électrique/Eléctrica Appendix B USE & Care Guide Surface Controls Operating During a Power FailureSetting the controls Pilotless IgnitionHigh Performance Burner CooktopSealed Burners Low Turn Down BurnerCare and Cleaning Ventilation System Ventilation SystemQuickset Pads Setting the ClockControl Panel ClockTimers Locking the Control and Oven DoorBake Options BakingConvect Convect OptionsConvect Bake Convect RoastRapid Preheat Broiling Chart BroilTo set Broil Cook & Hold DelayMore Options ProofingKeep Warm Meat ProbeFavorites Suggested Internal Food TemperaturesTo select a recipe from the preset Recipe List To Save the Last Recipe CompletedSetup LanguageAuto Convect Conversion Sabbath Mode Temp AdjustTo change the volume of the beeps To adjust the beepsTo change the timer beeps To turn off this featureAppendix C LP Propane Conversion Noir 27A Correct LP Propane Conversion Flip the regulator cap and replace the plastic Reverse steps 6 through To reassemble oven Usted Debe iniciar el enroscado de las30A 31A Correct BON Correcto Gas Conversion Instructions, JGS8850BD*, JGS8860BD Gas Conversion Instructions, JGS9900BD 42mm #5027 a Jaune Correct BON Correcto

JGS9900BD, JGS8860BD, JGS8850BD, JGS8750BD specifications

The Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD are a series of high-performance gas cooktops designed for culinary enthusiasts who value precision and sophistication. These models are distinguished by their robust construction, modern aesthetics, and a range of innovative features that streamline the cooking process.

One of the key features across these models is the professional-grade burners. The JGS8750BD, for instance, boasts a powerful 20,000 BTU burner, perfect for high-heat searing and rapid boiling. In contrast, the JGS8850BD offers a versatile 15,000 BTU burner, catering to a variety of cooking needs, including simmering and sautéing. For more delicate tasks, the JGS8860BD showcases a 5,000 BTU burner designed for simmering sauces and cooking delicate dishes with precision.

Another notable characteristic of these cooktops is the incorporation of the Jenn-Air® Turbo Flame™ technology. This feature provides an exceptional level of control, allowing chefs to achieve the desired temperature with accuracy. This technology is particularly valuable for those who require consistent heat for intricate recipes and techniques.

The seamless stainless-steel design not only elevates the appearance of any kitchen but also offers easy cleaning and maintenance. The high-quality grates found on these models are designed for durability and stability, ensuring pots and pans remain securely in place during cooking. Additionally, the continuous surface grates facilitate effortless sliding of cookware from one burner to another.

The JGS9900BD stands out with its advanced electronic ignition system, which ensures that the burners ignite quickly and reliably, minimizing downtime in the kitchen. Safety is also a priority across these models, featuring flame failure detection that automatically shuts off the gas supply if a flame goes out.

In terms of size, these cooktops cater to different kitchen configurations, with varying configurations to suit individual preferences and space constraints. Whether you're an avid home cook or a professional chef, the Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD combine superior technology with elegant design, making them a valuable addition to any modern kitchen. This series exemplifies Jenn-Air's commitment to quality, performance, and aesthetics, ensuring an elevated cooking experience for all users.