Burner Base | Burner Cap |
Matching letter designation.
| Figure 4: Burners Caps |
Checking Burner Cap Placement | • You may gently try to move the burner cap from side to |
• Check to make sure there is not gap between the | side to check if it is properly placed. If properly placed, |
the cap will click from side to side as the prongs hit the | |
burner cap and burner base. See figure “Burner Cap | groove ridge. |
Placement” on page 7 to see the correct and incorrect |
|
placements of the burner cap. |
|
Correct Burner Cap Placement | Incorrect Burner Cap Placement |
Figure 5: Burner Cap Placement
English 7