WARNING
Do not use a plastic container. If the
shortening is not cool enough, the container
will melt, possibly causing you to be burned, and causing shortening spill.
WARNING
Do not allow the shortening to overflow the
containers. Shortening will get on the floor, and if the shortening is not cool enough, you may be burned.
4.After the kettle has been drained, brush any accumulated carbon from the heater coils. Accumulated carbon causes corrosion and poor heat recovery.
5.Remove the drain tray.
WARNING
Thoroughly clean and dry the floor if shortening is spilled. Shortening on the floor can cause serious injury or loss of life.
6.Remove the heater head and element.
7.Lift out the kettle and pour out the remaining shortening and accumulated sediment.
8.Flush out the kettle with hot water to remove all sediment.
Washing
1.Wash the kettle carefully with detergent to remove all stains and burned shortening.
2.Scrub the inside of the kettle. Do not use any abrasive cleaners or scrapers.
WARNING
To avoid being burned, be very careful as you work with hot cleaning solution. Never put your hands in the solution. Wear gloves and long sleeves in case any solution splashes.
3.Dry the kettle thoroughly with a soft cloth before replacing in the fryer cabinet.
WARNING
Dry the kettle thoroughly. Moisture causes hot shortening to spatter, which may cause serious injury.
4.Make sure the kettle is properly seated in the case.
5.Install the heater head.
Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone
6 | 616B & 616BT Counter Top Fryer |