Henny Penny 500, 600 warranty Gas fryers only See ignition modules

Page 65

Model 500/600

pilot orifice

a controlled opening for the pilot light located on the burner assembly

(gas fryers only)

 

pilot light

a small flame that remains burning even when the fryer is not in use; the flame

(gas fryers only)

ignites the gas when the fryer is turned on

power/pump switch

a three-way switch located on the front control panel of the fryer that serves as an off/on

 

switch and a filter switch

pressure gauge

the gauge located on the left rear corner of the frypot that shows the pressure inside the

 

frypot

pressure pad

a piece of plastic on eight head fryers located between the lid locking arm and the lid

 

casting that helps create the seal for the lid; only a service technician should perform

 

maintenance or repair on the pressure pad

product

a food item cooked in the fryer

ready

the starting, preset cooking temperature, at which product is placed in the shortening

safety relief valve

a spring-loaded valve that automatically releases excess pressure if the operating valve

 

becomes obstructed; if the safety relief valve activates, turn the Power/Pump switch to

 

OFF to release all pressure from the frypot

setpoint

a preset cooking temperature; the setpoint is a programmable feature

shipping spacer

a spacer located in the deadweight assembly for protection during shipment

shortening mixing system

an automatic system on eight head fryers that periodically uses the filter pump to mix the

 

shortening in the frypot to prevent an accumulation of moisture to minimize the boiling

 

action in the frypot

sift breading

the process of removing clumps from breading

solenoid valve

a valve used to generate or release pressure for the cook cycle

spark igniters

the igniters that create a spark to ignite the pilot lights on eight head gas fryers

(gas fryers only)

(see ignition modules)

standpipe

the pipe through which oil is pumped back into the frypot after the filtering process is

 

complete

standpipe assembly

the pipe and fittings that are part of the shortening filtering process

straight brush

a brush that is included with the fryer that is used to clear the drain in the bottom of the

 

frypot

temperature probe

a round probe that is located in the inside of the frypot that measures the temperature of

 

the oil in the frypot; the probe communicates with the control panel

203

G-4

Page 64 Page 66
Image 65
Page 64 Page 66
Contents OPERATOR’S Manual Page Limited Warranty for Henny Penny Equipment Page Keep appliance area free and clear from combustibles Technical Data for CE Marked Products Table of Contents Table of Contents Proper Care Assistance Model Variations Pressure FryerPressure Heat Time Which, if not avoided, could result in death or serious SafetyInjury Hazardous Situation WHICH, if notStep IntroductionUnpacking Instructions Unpacking Instructions Selecting the Fryer Position and install fryer to prevent tipping or moveLocation Ment. Restraining ties may be used for stabilizationModel 500/600 GAS Supply Main gas line supply GAS PipingHenny Penny Part No , which complies with GAS Piping Procedure Regulator SettingGAS Leak Test GAS PressureShutdown Procedure ProcedureElectrical Requirements Electric Fryer Data Table Supply Wiring and Fusing for Electric FryerGAS Fryer ElectricalRequirements Motor Bearings Operational Checks Checking the Filter PumpPage Refer to Figure Description Function Operating ControlsControl Panel Operating ControlsDescription Function Operating ComponentsDo not Pull this RING. Severe Burns from Steam will ResultInjuries and burns could result Failure to clean the deadweight assembly daily couldResult in the fryer building too much pressure. Severe Exhaust and Severe Burns will Result Is Under PRESSURE. HOT Shortening willGas Electric Operating Controls Operating ComponentsGAS Model Operating Controls Filling or Adding Shortening Model 500/600 Basic Operations and Procedures Basic Operations and Procedures Step Basic Operations and Procedures Frequency Regular Maintenance ScheduleFilter Pump Motor PROTECTOR- Manual Reset Filtering of Shortening Filtering of Shortening Filtering of Shortening Shortening Move the main power switch from Pump to OFF. This willFiltering Hot water Filter Pump Problem Prevention Changing the Filter EnvelopeThis union could be hot! Use protective cloth or glove Changing the Filter Envelope Changing the Filter Envelope Cleaning the Frypot Cleaning the Frypot Step Model 500/600 Loss of pressure during a cook cycle ReversingLID Gasket LID Lubrication Limit Stop Adjustment Cleaning the Safety Relief Valve Limit Stop AdjustmentCheck & Tighten Element Spreader Bars Model 500 only Introduction Time and SET-POINT Programming ProgrammingMode Special ProgramSpecial Program Mode Problem Cause Correction Troubleshooting GuideDisplay Cause Panel Board Correction Error CodesError Code Table Error Code Table Display Cause Panel Board Correction Glossary Level also referred to as level indictor lines Also referred to as fill lines Gas fryers only See ignition modules Henny Penny Corporation Box Eaton,OH Toll free in USA
Related manuals
Manual 100 pages 58.33 Kb

500, 600 specifications

Henny Penny has established itself as a leading name in the commercial cooking equipment industry, particularly known for its innovative fryers and cooking solutions. Among its notable products are the Henny Penny 500 and 600 series, which embody the brand's commitment to efficiency, reliability, and advanced technology.

The Henny Penny 500 series is designed for high-volume operations, perfect for restaurants, fast-food chains, and other foodservice establishments that require exceptional frying performance. This series features a highly efficient airflow design that ensures even cooking and reduces energy consumption. With a stainless-steel counter design, the Henny Penny 500 not only looks appealing but also offers durability and ease of cleaning, essential for maintaining hygiene in a busy kitchen.

One of the standout technologies in the 500 series is the advanced filtration system. This system helps to prolong oil life, reducing the frequency of oil replacements, which can save money and minimize waste. The intuitive control panel allows operators to manage cooking times and temperatures easily, resulting in consistent food quality. Additionally, the automatic basket lift feature enhances safety by reducing the chances of accidents during frying.

The Henny Penny 600 series takes this innovation further with additional features aimed at maximizing productivity. It shares many similarities with the 500 series but includes upgraded digital controls that allow for precise temperature management and programming options for various menu items. This added flexibility provides operators the ability to multitask effectively in a fast-paced kitchen environment.

Both series prioritize energy efficiency, with the 600 series particularly noted for its ability to minimize energy consumption without compromising performance. The fryers’ design incorporates energy-efficient heating elements and advanced insulation technology, ensuring quick recovery times and lower operating costs.

Furthermore, Henny Penny has incorporated user-friendly maintenance features in both series, such as easy-access panels for cleaning and routine maintenance checks. By focusing on operational ease and performance efficiency, the 500 and 600 series fryers exemplify Henny Penny’s dedication to providing commercial kitchens with the tools they need to succeed.

In summary, the Henny Penny 500 and 600 series reflect a blend of advanced technology and practical design, making them invaluable assets in any high-volume foodservice operation. With features such as high-efficiency frying, easy maintenance, and operator-centric controls, they stand as testaments to Henny Penny’s innovation in commercial cooking solutions.
Top Page Image Contents