Hoshizaki DCM-750BWH-OS VI. Cleaning and Maintenance, Cleaning and Sanitizing Instructions

VI. Cleaning and Maintenance

IMPORTANT

Ensure all components, fasteners, and thumbscrews are securely in place after any cleaning or maintenance is done to the equipment.

A. Cleaning and Sanitizing Instructions

HOSHIZAKI recommends cleaning this unit at least twice a year. More frequent cleaning, however, may be required in some existing water conditions.

WARNING

1.To prevent injury to individuals, do not use any ammonia type cleaners.

2.Carefully follow any instructions provided with the bottles of cleaning and sanitizing solution.

3.Always wear liquid-proof gloves to prevent the cleaning and sanitizing solutions from coming into contact with skin.

4.After cleaning, do not use ice made from the cleaning and sanitizing solutions. Be careful not to leave any solution on the parts or in the storage bin.

Extruding Head

Spout A

Evaporator Assembly Spout B

Reservoir

Power Switch

Control Switch

Dispense Mode Switch

Agitating Motor (L)

Dispensing Motor

Agitating Motor (R)

Fig. 6

Agitator (L)

Agitator (R)

Dispensing Auger

63