AIR OUTLET IN RECIRCULATING VERSION
•Re-position any components already fitted for recir- culating version that have been removed.
•Re-position reduction flange 9 onto the hood body.
•Re-position pvc pipe 7 onto the flange.
•Re-tighten the inclinable grid 8 onto the air outlet, making sure it is positioned well on the pipe.
•Make sure the charcoal anti-odour filters are in place.
9
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
•Remove the grease filters (see paragraph Mainte- nance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.