LIGHTING AND SHUTTING DOWN PILOTS
Open Top, Griddle Top and Hot Top Burner Pilots
1.Turn main gas supply ON.
2.Turn all top burner valve knobs ON to purge gas line of air.
3.Turn top burner valve knobs OFF.
4.Wait 30 seconds.
5.Using a taper, light the pilot(s).
6.If pilot fails to light, wait 5 minutes and repeat Steps 1 through 5.
7.Turn one top burner valve ON to make sure that all gas lines are completely purged of air. Turn burner OFF when gas begins to flow.
Nightly Shutdown: Turn burner valve OFF; pilot will remain lit.
Complete Shutdown: Turn burner valve OFF; pilot will remain lit. Turn main gas valve OFF.
Standard Oven Pilot
Before lighting oven, be sure that range top sections have been lit.
1.Open oven door and locate square pilot lighter cutout.
2.Using a taper, light oven pilot by depressing red ignition button (Fig. 20) located on the side control panel above the thermostat knob. Light the pilot and continue to hold the ignition button in for 30 seconds. If pilot fails to light, turn main gas valve OFF and wait 5 minutes before repeating Steps 1 and 2.
3.Set oven thermostat to desired temperature.
Fig. 20
Nightly Shutdown: Turn oven burner valve OFF.
Complete Shutdown: Turn oven burner valve OFF. Turn main gas supply OFF.
– 16 –