GE PT925 manual Before you call for service…, Close the oven door

Problem

Possible Causes

What To Do

“Crackling” or

This is the sound of the

• This is normal.

“popping” sound

metal heating and cooling

during both the cooking and

cleaning functions.

Excessive smoking

Excessive soil.

• Touch the CLEAR/OFF pad. Open the windows to

during a clean cycle

rid the room of smoke. Wait until LOCKED goes off.

Wipe up the excess soil and reset the clean cycle.

Oven door will not

Oven too hot.

• Allow the oven to cool below locking temperature.

open after a clean cycle

Oven not clean after

Oven controls not properly set. • See the Using the self-cleaning oven section.

a clean cycle

Oven was heavily soiled.

• Clean up heavy spillovers before starting the clean

cycle. Heavily soiled ovens may need to self-clean

again or for a longer period of time.

“LOCKED” flashes

The self-clean cycle has been

• Close the oven door.

in the display

selected but the door is not

closed.

“LOCKED” is on

The oven door is locked

• Touch the CLEAR/OFF pad. Allow the oven to cool.

when you want

because the temperature

to cook

inside the oven has not

dropped below the

locking temperature.

“F—and a number

You have a function error code. • Disconnect all power to the oven for

or letter” flash

at least 30 seconds and then reconnect power.

in the display

If the function error code repeats, call for service.

“LOCKED” appears

The controls have

• See the Control Lock section to unlock.

in the oven display

been locked.

Control signals after

You forgot to enter a

• Touch the BAKE pad and desired temperature or

entering cooking time

bake temperature or

the SELF CLEAN HI/LO pad and desired clean time.

or start time

cleaning time.

Display goes blank

A fuse in your home may be

• Replace the fuse or reset the circuit breaker.

blown or the circuit breaker

tripped.

The clock is in the

• See the Special features of your oven control section.

black-out mode.

Display flashes

Power failure.

• Reset the clock.

Unable to get the

Oven control pads were

• The BROIL HI/LO and BAKE pads must be touched

display to show “SF”

not touched properly.

at the same time and held for 3 seconds.

“Probe” appears

This is reminding you to

• Enter a probe temperature.

in the display

enter a probe temperature

after plugging in the probe.