GE FUM13 owner manual Case of Extended Power Failure, Preparing to Move, Preparing for Vacation

Page 12

Operating Instructions Safety Instructions

Care and cleaning of the freezer.

In Case of Extended Power Failure

Keep freezer door/lid closed. Your freezer

WARNING: Handling of dry ice can cause

will keep food frozen for 24 hours provided

freezing of the hands—gloves or other

warm air is not admitted.

protection is recommended.

If freezer is out of operation for 24 hours or

If dry ice is not available, move food to a

more, add dry ice. Leave ice in large pieces.

frozen food locker temporarily—until power

Add more ice as required.

is restored.

Preparing to Move

 

Disconnect the power cord plug from the wall

Be sure freezer stays in upright position

 

outlet. Remove foods, defrost (on Manual

during actual moving and in van. The

 

Defrost models) and clean the freezer.

freezer must be secured in van to prevent

 

Secure all loose items such as grille and

movement. Protect outside of freezer with

 

blanket.

 

shelves by taping them securely in place

 

 

 

to prevent damage.

 

 

 

 

 

 

 

Preparing for Vacation

Installation

Instructions

Tips

To maintain freezer in operation during vacations, be sure your house power is not turned off. For sure protection of freezer contents, you may want to ask a neighbor to check the power supply and freezer operation every 48 hours.

For extended vacations or absences, you may prefer to move your frozen foods to a storage locker temporarily. If your freezer is to be left empty, disconnect power cord plug from wall outlet. To prevent formation of odors, place open box of baking soda in freezer and leave freezer door/lid open.

When the freezer is not operating, it can be left in an unheated house or room without damage to cabinet or mechanism.

Consumer Support Troubleshooting

The freezer should be located in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.

Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer. This cuts down on frost buildup inside the freezer.

Freezer shelves should not be lined with aluminum foil, wax paper or paper toweling. Liners interfere with cold air circulation, making the freezer less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

12

Image 12
Contents Installation Instructions Troubleshooting TipsManuel d’utilisation Et d’installation Operating InstructionsSafety Precautions Safety InstructionsProper Disposal of the Freezer USE of Extension CordsRefrigerants Before You Throw Away Your OldHOW to Connect Electricity Operating InstructionsInstructions Installation Troubleshooting Tips Consumer SupportAbout the operation of your freezer Starting the FreezerInstructions Safety Installation Instructions TipsConsumer Support Troubleshooting High-Temp Alarm Switch on some modelsSafety Instructions Operating Instructions Adjustable Shelves Upright modelsKey-Ejecting Lock on some models Freezer Shelves on some modelsOperating Instructions Safety Instructions Adjustable Door Bins some Upright modelsSafety Operating InstructionsDefrosting instructions. for Manual Defrost models For Complete DefrostingCare and cleaning of the freezer Cleaning Your FreezerPackages will remain easy to separate Remove Lid Removal on Chest models Case of Extended Power Failure Preparing to MovePreparing for Vacation Freezing of the hands-gloves or otherPreparing to install the freezer Instructions InstallationFreezer Location ClearancesNormal operating characteristics Before you call for service…Operating Instructions Safety Instructions Installation Consumer Support Troubleshooting TipsSafety Instructions Operating Instructions Installation Troubleshooting Tips Consumer SupportSelected temperature Freezer requires 4 hours to cool down completelyWhenever freezer is on You might hear the compressor running while it coolsBubbling or gurgling This is normalGeneral Electric Company Consumer Product Ownership Registration Ownership Registration Page Safety Instructions Operating Instructions Safety Instructions InstructionsSafety Instructions Operating Instructions Freezer Warranty Instructions Safety InstructionsOperating GE Will ReplaceMesures de sécurité Fonctionnement Installation InstallationFonctionnement Soutien au consommateurFonctionnement Installation Mesures DE SécuritéMesures de sécurité DépannageCordons Prolongateurs Raccordement ÉlectriqueFonctionnement Mesures de sécurité Installation Dépannage Commande de températureFonctionnement de votre congélateur Mise en marche du congélateurMesures Dépannage Soutien au consommateurClayettes de congélateur sur certains modèles Lampe intérieureClayettes réglables Modèles verticaux Mesures de sécurité Cale de clayette métallique certains modèles verticauxSécurité Mesures deFonctionnement ConsommateurSoutien au Conseils de dépannageEntretien et nettoyage du congélateur De sécurité FonctionnementNettoyage de votre congélateur Pas de dégivrage sur les modèles Sans givreSur les modèles verticaux sans commande électronique Sur les modèles Verticaux à Commande ElectroniqueEnlèvement de la porte du compartiment congélation Enlèvement de la porte sur les modèles coffreDe sécurité Lors d’une panne de courant prolongéeDéménagement Le congélateur Doit être placé dansPréparatifs pour l’installation du congélateur Emplacement du congélateurDégagements Fonctionnement MesuresAvant d’appeler un réparateur… Problème Causes possibles CorrectifsFonctionnement Mesures de sécurité Installation Ne se ferme pas De lui-mêmeAprès une période de Non-fonctionnementPage Garantie du congélateur GE remplaceraCe que GE ne couvrira pas Pour une période deService de réparations Soutien au consommateurProlongation de garantie Contactez-nousSeguridad Operación Instalación Información de seguridad Instrucciones de operaciónInstrucciones de instalación Servicio al consumidorProblemas Precauciones DE SeguridadDeshacerse Debidamente DEL Congelador SeguridadUSO DE Cables DE Extensión Cómo Conectar LA ElectricidadOperación Acerca de la operación del congelador Cómo poner el congelador en funcionamientoSeguridad OperaciónAcerca de la operación del congelador.ge.com Precaución Si se agregan más deInstalación Servicio al consumidor Solucionar problemas Cierre de llave a presión en algunos modelosEstantes para el congelador en algunos modelos Luz interiorRecipientes de puerta ajustables algunos modelos verticales Cajones para verduras y frutas algunos modelos verticalesSoporte del estante de alambre algunos modelos verticales Zona de congelación suave algunos modelos verticalesPara un descongelamiento completo Solucionar problemas Servicio al consumidor Cuidado y limpieza del congeladorLimpieza del congelador ControlesPara retirar la puerta del congelador En modelos verticales con controles no electrónicosCómo retirar la tapa en modelos horizontales Problemas Servicio al consumidor En caso de interrupción prolongada del suministro eléctricoEn caso de mudanza El congelador Debe ubicarse en el Área más fría de laPasos previos a la instalación del congelador Ubicación del congeladorSeparaciones InstalaciónProblema Causas Posibles Qué hacer Características de funcionamiento normalesAntes de solicitar un servicio… La colocación de tablas de 2 X 4″ 51 mm X 102 mm El gabinete vibraDebajo del congelador ayudará a sostenerlo y podría Reducir la vibraciónDe escarcha No es extraño durante Períodos de alta humedadSuperficie externa Transferir calor desde la parte interior del gabinete delServicio al consumidor Solucionar problemas Seguridad OperaciónPor el período de GE reemplazará Lo que GE no cubriráServicio al consumidor Página Web de GE Appliances Solicite una reparaciónGarantías ampliadas Piezas y accesoriosSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

FUM13 specifications

The GE FUM13 is a highly advanced and versatile gas turbine that harnesses the latest technologies to deliver exceptional performance and efficiency. Designed for both flexibility and reliability, the FUM13 is a part of GE’s renowned portfolio, catering to a variety of industries including power generation, oil and gas, and industrial processes.

One of the standout features of the GE FUM13 is its ability to operate effectively across different fuel types. The turbine is designed for multi-fuel operation, enabling users to switch between natural gas, oil, and other alternative fuels with ease. This adaptability not only helps in reducing operational costs but also enhances sustainability by allowing facilities to utilize the most economical or available fuel sources.

The FUM13 integrates state-of-the-art aerodynamics and thermodynamics principles, which contribute to its high efficiency ratings. Advanced cooling techniques are employed in the turbine’s design, ensuring that it can withstand high temperatures while maintaining performance. This capability aids in achieving significant efficiency gains, allowing for lower emissions and reduced fuel consumption, which are critical in today’s environmentally conscious landscape.

Furthermore, the GE FUM13 is equipped with digital technologies that leverage data analytics and predictive maintenance. The turbine harnesses real-time operational data, enabling operators to optimize performance and proactively address maintenance needs. This feature not only minimizes downtime but also extends the operational life of the turbine, ultimately resulting in cost savings over time.

A distinguishing characteristic of the FUM13 is its compact and modular design. This configuration facilitates easier installation and maintenance, allowing users to integrate the turbine into their existing infrastructure with minimal disruption. The modular approach also means that the system can be scaled to meet specific power output requirements, making it a suitable choice for both small and large-scale applications.

In summary, the GE FUM13 gas turbine stands out with its multi-fuel capability, advanced thermal efficiency, digital integration, and modular design. These features, combined with GE's commitment to innovation and sustainability, make the FUM13 an ideal solution for businesses looking to enhance their energy production systems while also addressing the challenges of fuel flexibility and emissions reduction. As industries continue to evolve, the GE FUM13 is poised to play a pivotal role in shaping the future of energy generation.