GE FUM13 Preparing to install the freezer, Freezer Location, Clearances, Level Freezer

Page 13

Preparing to install the freezer.

ge.com

Read these instructions completely and carefully.

Freezer Location

Safety Instructions

Your freezer should be conveniently located for day-to-day use in a dry, well-ventilated room.

Do not install the freezer where the temperature will go below 0°F or above 110°F, because it will not maintain proper temperatures.

Be sure to install your freezer on a floor strong enough to support it when it is fully loaded.

The freezer must be solidly positioned on the floor if it is to function at its best. Shims may be used to accomplish this wherever the floor is too uneven.

If the place selected for the freezer is damp or moist, place 2 X 4’s (51 mm X 102 mm) under its entire length to ensure adequate support.

Operating

Clearances

On all models, allow 3″ (76 mm) on top, back and sides for proper air circulation.

Instructions

Turn right

Turn left

to lower

to raise

 

 

Adjustable Legs (on Upright models)

Legs at the front corners of the freezer should be set so the freezer is firmly positioned on the floor, and the front is raised just enough so the door closes easily when opened about halfway.

Level Freezer

Instructions

Installation

Upright Models:

Discard crate screws and wood base. Use a carpenter’s level to level the freezer from back to front. Adjust the plastic leveling feet in front 1/2 bubble higher so the door closes easily when left open.

Chest Models:

If needed, add metal or wood shims between foot pads and floor.

Unit Loading (on Upright models)

CAUTION: To allow the door to close and seal properly, DO NOT let food packages extend past the front of the shelves.

13

Troubleshooting Tips Consumer Support

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Troubleshooting Tips Installation InstructionsManuel d’utilisation Et d’installation Operating InstructionsSafety Instructions Safety PrecautionsUSE of Extension Cords Proper Disposal of the FreezerRefrigerants Before You Throw Away Your OldOperating Instructions HOW to Connect ElectricityTroubleshooting Tips Consumer Support Instructions InstallationAbout the operation of your freezer Starting the FreezerInstallation Instructions Tips Instructions SafetyConsumer Support Troubleshooting High-Temp Alarm Switch on some modelsAdjustable Shelves Upright models Safety Instructions Operating InstructionsKey-Ejecting Lock on some models Freezer Shelves on some modelsAdjustable Door Bins some Upright models Operating Instructions Safety InstructionsOperating Instructions SafetyDefrosting instructions. for Manual Defrost models For Complete DefrostingCleaning Your Freezer Care and cleaning of the freezerPackages will remain easy to separate Remove Lid Removal on Chest models Preparing to Move Case of Extended Power FailurePreparing for Vacation Freezing of the hands-gloves or otherInstructions Installation Preparing to install the freezerFreezer Location ClearancesBefore you call for service… Normal operating characteristicsOperating Instructions Safety Instructions Installation Consumer Support Troubleshooting TipsTroubleshooting Tips Consumer Support Safety Instructions Operating Instructions InstallationSelected temperature Freezer requires 4 hours to cool down completelyYou might hear the compressor running while it cools Whenever freezer is onBubbling or gurgling This is normalGeneral Electric Company Consumer Product Ownership Registration Ownership Registration Page Safety Instructions Operating Instructions Instructions Safety InstructionsSafety Instructions Operating Instructions Instructions Safety Instructions Freezer WarrantyOperating GE Will ReplaceInstallation Mesures de sécurité Fonctionnement InstallationFonctionnement Soutien au consommateurMesures DE Sécurité Fonctionnement InstallationMesures de sécurité DépannageRaccordement Électrique Cordons ProlongateursCommande de température Fonctionnement Mesures de sécurité Installation DépannageFonctionnement de votre congélateur Mise en marche du congélateurDépannage Soutien au consommateur MesuresLampe intérieure Clayettes de congélateur sur certains modèlesClayettes réglables Modèles verticaux Cale de clayette métallique certains modèles verticaux Mesures de sécuritéMesures de SécuritéFonctionnement ConsommateurSoutien au Conseils de dépannageDe sécurité Fonctionnement Entretien et nettoyage du congélateurNettoyage de votre congélateur Pas de dégivrage sur les modèles Sans givreSur les modèles Verticaux à Commande Electronique Sur les modèles verticaux sans commande électroniqueEnlèvement de la porte du compartiment congélation Enlèvement de la porte sur les modèles coffreLors d’une panne de courant prolongée De sécuritéDéménagement Le congélateur Doit être placé dansEmplacement du congélateur Préparatifs pour l’installation du congélateurDégagements Fonctionnement MesuresProblème Causes possibles Correctifs Avant d’appeler un réparateur…Fonctionnement Mesures de sécurité Installation De lui-même Ne se ferme pasAprès une période de Non-fonctionnementPage GE remplacera Garantie du congélateurCe que GE ne couvrira pas Pour une période deSoutien au consommateur Service de réparationsProlongation de garantie Contactez-nousInformación de seguridad Instrucciones de operación Seguridad Operación InstalaciónInstrucciones de instalación Servicio al consumidorPrecauciones DE Seguridad ProblemasDeshacerse Debidamente DEL Congelador SeguridadCómo Conectar LA Electricidad USO DE Cables DE ExtensiónOperación Cómo poner el congelador en funcionamiento Acerca de la operación del congeladorSeguridad OperaciónPrecaución Si se agregan más de Acerca de la operación del congelador.ge.comCierre de llave a presión en algunos modelos Instalación Servicio al consumidor Solucionar problemasEstantes para el congelador en algunos modelos Luz interiorCajones para verduras y frutas algunos modelos verticales Recipientes de puerta ajustables algunos modelos verticalesSoporte del estante de alambre algunos modelos verticales Zona de congelación suave algunos modelos verticalesPara un descongelamiento completo Cuidado y limpieza del congelador Solucionar problemas Servicio al consumidorLimpieza del congelador ControlesEn modelos verticales con controles no electrónicos Para retirar la puerta del congeladorCómo retirar la tapa en modelos horizontales En caso de interrupción prolongada del suministro eléctrico Problemas Servicio al consumidorEn caso de mudanza El congelador Debe ubicarse en el Área más fría de laUbicación del congelador Pasos previos a la instalación del congeladorSeparaciones InstalaciónCaracterísticas de funcionamiento normales Problema Causas Posibles Qué hacerAntes de solicitar un servicio… El gabinete vibra La colocación de tablas de 2 X 4″ 51 mm X 102 mmDebajo del congelador ayudará a sostenerlo y podría Reducir la vibraciónNo es extraño durante Períodos de alta humedad De escarchaSuperficie externa Transferir calor desde la parte interior del gabinete delSeguridad Operación Servicio al consumidor Solucionar problemasPor el período de GE reemplazará Lo que GE no cubriráSolicite una reparación Servicio al consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesoriosParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

FUM13 specifications

The GE FUM13 is a highly advanced and versatile gas turbine that harnesses the latest technologies to deliver exceptional performance and efficiency. Designed for both flexibility and reliability, the FUM13 is a part of GE’s renowned portfolio, catering to a variety of industries including power generation, oil and gas, and industrial processes.

One of the standout features of the GE FUM13 is its ability to operate effectively across different fuel types. The turbine is designed for multi-fuel operation, enabling users to switch between natural gas, oil, and other alternative fuels with ease. This adaptability not only helps in reducing operational costs but also enhances sustainability by allowing facilities to utilize the most economical or available fuel sources.

The FUM13 integrates state-of-the-art aerodynamics and thermodynamics principles, which contribute to its high efficiency ratings. Advanced cooling techniques are employed in the turbine’s design, ensuring that it can withstand high temperatures while maintaining performance. This capability aids in achieving significant efficiency gains, allowing for lower emissions and reduced fuel consumption, which are critical in today’s environmentally conscious landscape.

Furthermore, the GE FUM13 is equipped with digital technologies that leverage data analytics and predictive maintenance. The turbine harnesses real-time operational data, enabling operators to optimize performance and proactively address maintenance needs. This feature not only minimizes downtime but also extends the operational life of the turbine, ultimately resulting in cost savings over time.

A distinguishing characteristic of the FUM13 is its compact and modular design. This configuration facilitates easier installation and maintenance, allowing users to integrate the turbine into their existing infrastructure with minimal disruption. The modular approach also means that the system can be scaled to meet specific power output requirements, making it a suitable choice for both small and large-scale applications.

In summary, the GE FUM13 gas turbine stands out with its multi-fuel capability, advanced thermal efficiency, digital integration, and modular design. These features, combined with GE's commitment to innovation and sustainability, make the FUM13 an ideal solution for businesses looking to enhance their energy production systems while also addressing the challenges of fuel flexibility and emissions reduction. As industries continue to evolve, the GE FUM13 is poised to play a pivotal role in shaping the future of energy generation.
Top Page Image Contents