12”
(305 mm)
½”
(12.7 mm)
Side flange
253/8”
(645 mm)
Low Back
(purchased separately)
* Low Back required when there is less than |
12” (305 mm) horizontal clearance from |
back of cooktop to combustible material. |
With more than 12” (305 mm) of clearance, |
the Flush Island Trim may be used. |
9¼” (235 mm) TO CENTERLINE
OF GAS INLET
23 5/16”
(592 mm)
Cabinet face for installation with projecting control panel. 
Cabinet face for installation with flush control panel.
75/8”
(194 mm)
1¼”
(32 mm)
Note: Unit is shown with Low Back guard (purchased separately).
Figure 5: Side View of Rangetop
11/16” (18 mm) Notch Depth
9/16” (14 mm)
Front projects outward 9/16" (14 mm) as shown from standard
Figure 6: Projecting from Cabinet Front
1¼” (32 mm) Notch Depth
Front flush with cabinets; minimum of 249/16” (624 mm) cabinet depth required.
Figure 7: Flush to Cabinet Front
English 8