Unpacking, Moving, & Anchoring the Rangetop

Step 3: Unpacking, Moving, & Anchoring the Rangetop

CAUTION:

Proper equipment and adequate manpower must be used in moving the appliance to avoid damage and/or personal injury. The unit is heavy and should be handled accordingly.

•Verify that the appliance is correct for the type of gas being provided. Refer to Step 4 before proceeding with the installation.

•Remove the outer carton and packing material from the shipping base. Ensure that you have all rangetop components before proceeding.

•Remove the cooking grates, griddle plate (if applicable), and burner caps to reduce rangetop’s weight.

•Leave adhesive-backed foam layer over brushed-metal surfaces, to protect finish from scratches, until the rangetop is installed in its final position.

•Using a Phillips head screwdriver, remove the three mounting brackets securing the rangetop to the pallet. Discard the screws and brackets after removal.

•Attach the backguard before sliding the appliance into the final installed position (see Step 6).

•Lift and place the rangetop in the countertop opening. Be careful not to pinch the power cord or gas inlet. Care should be used not to scratch the countertop.

•Make sure that the power cord is free and hanging loose.

•The rangetop must be level for proper performance.

•Replace the cooking grates, griddle plate, and burner caps. Ensure that the burner caps are correctly seated on the burner bases.

Griddle Tilt Adjustment (not all models)

Check the griddle adjustment by pouring two tablespoons of water on the back of the griddle plate (Figure 10). The water should slowly roll into the grease tray. If not, adjust the two screws under the back of the plate. Start with one half turn counter-clockwise (CCW) of the screws. Further adjustment should be made by one-quarter turn until water slowly flows into the grease tray.

Move griddle plate to the side and turn leveling screws

Figure 10: Griddle Plate Leveling Screws

Step 4: Gas Requirements and Hookup

Rangetops are shipped by the factory to operate on natural gas.They must be converted for use with propane. Verify the type of gas being used at the installation site matches the type of gas used by the appliance.

If the location site requires conversion from natural gas to propane (LP), contact the dealer where the unit was purchased or contact THERMADOR® to purchase a conversion kit. The field conversion kit for the rangetops in this series is THERMADOR Model PALPKITHC. Obey all instructions in this kit for correct conversion of the gas regulator and settings for the gas valves. Field conversion must be done by qualified service personnel only.

WARNING:

If a gas conversion kit is used, the kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in the instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of the kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions supplied with the kit.

English 10

PCG30, PCG48, PCG36 specifications

The Thermador PCG36, PCG48, and PCG30 are beautifully engineered professional-style gas cooktops that stand out for their performance, design, and innovative features. These models embody the ethos of Thermador, which is to provide culinary enthusiasts with the tools they need to create exceptional dishes at home.

One of the main features of these cooktops is their powerful Star® Burners. The PCG36 and PCG48 come equipped with up to five burners, including a highly efficient center burner that delivers up to 22,000 BTUs of heat. This powerful burner is ideal for searing, stir-frying, or boiling large pots of water quickly. The precise temperature control provided by these burners allows for a wide range of cooking techniques, from delicate sauces to high-heat frying.

Each model showcases a unique cooking surface design, offering both functionality and aesthetics. The heavy-gauge stainless steel construction not only provides durability but also creates a sleek, sophisticated look suitable for any luxury kitchen. The Cooktop’s continuous cast-iron grates ensure that pots and pans slide effortlessly across the surface, enhancing the overall cooking experience.

In addition to their robust performance, these models are equipped with advanced features such as patented ExtraLow® simmering technology, which delivers ultra-low heat settings perfect for melting chocolate or keeping sauces warm without scalding. This technology is ideal for chefs who require precise control over their cooking temperatures.

The Thermador PCG series also prioritizes safety with features like automatic re-ignition, which ensures that if a burner’s flame is extinguished, it will automatically relight. Safety is paramount, particularly in fast-paced kitchen environments, and this feature provides peace of mind while cooking.

Moreover, one of the standout characteristics of these cooktops is their compatibility with Thermador’s exclusive Freedom® cooktops, which allows for more flexible cooking configurations. This innovative design enables chefs to arrange their cooking stations according to their unique preferences.

In summary, the Thermador PCG36, PCG48, and PCG30 models exemplify precision, durability, and modern design. With their powerful burners, advanced technologies, and safety features, they cater to the demands of both amateur cooks and seasoned chefs. These cooktops are an excellent investment for anyone looking to elevate their culinary experience and kitchen aesthetics.