GE 20 About the controls on the refrigerator, Startup Steps for Proper Temperature Control

Page 6

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

About the controls on the refrigerator.

Your controls will look like one of the following:

FREEZERREFRIGERATOR

4

5

6

4

5

6

 

3

 

7

3

 

7

 

2

 

8

2

 

8

 

 

 

 

 

 

 

0 IS OFF

1

 

9

1

 

9

9 IS COLDEST

0

 

 

 

 

 

 

 

 

 

 

 

 

Startup Steps for Proper Temperature Control

STEP 1—Set Fresh Food Control on “5.” STEP 2—Set Freezer Control on “5.”

STEP 3—WAIT 12 HOURS for temperature to stabilize.

STEP 4—If a change is needed, move the control one number at a time and allow 12 hours for temperature to stabilize.

NOTE: Setting the controls to the 0 (off) position does not remove power to the light circuit.

Control settings will vary based on personal preferences, usage and operating conditions and may require more than one adjustment.

To Change Temperature Control Setting with Touch Pads:

Freezer setting is on the left side of the display.

Fresh Food setting is on the right side of the display.

Press the warmer or colder pad for compartment and direction desired.

Present control setting number will illuminate.

Each time the pad is touched, compartment setting changes one number. A display of 1 is warmest and 9 is the coldest setting.

NOTE: Setting the controls to the 0 (off) position does not remove power to the light circuit.

Control settings will vary based on personal preferences, usage and operating conditions and may require more than one adjustment.

6

Image 6
Contents Refrigerators Model # Serial #Consumer Support Before You Throw Away Your Old Refrigerator or FreezerRefrigerants Troubleshooting Tips Consumer Support Instructions Installation InstructionsGe.com Refrigerator Shelves Rearranging the ShelvesTo remove Lift Freezer Pan Freezer ShelvesSpillproof Shelves on some models Adjustable Humidity Crispers and Snack Pan on some modelsTips Consumer Support Crisper RemovalStartup Steps for Proper Temperature Control To Change Temperature Control Setting with Touch PadsAbout the controls on the refrigerator About the water filter cartridge. On some models About the automatic icemakerTips About the ice and water dispenser. On some models Troubleshooting Tips Installation InstructionsIcemaker Accessory Kit To Use the DispenserCare and cleaning of the refrigerator Clearances Refrigerator LocationRollers Door AlignmentBefore YOU Begin What YOU will NeedRoute the Tubing Shut OFF Main Water Supply Drill the Hole for the ValveFasten the Shutoff Valve Connect the Tubing to ValveTurn the Water on AT the Shutoff Valve Plug in the RefrigeratorStart the Icemaker Before you call for service… Normal operating soundsSafety Water spurting from Water in first glass isWater dispenser does DispenserCustomer Warranty Instructions Operating Instructions Safety Instructions GE Will ReplaceWhat GE Will Not Cover General Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesConsumer Product Ownership Registration For customers in the United States For customers in CanadaGeneral Electric Company Fonctionnement La clientèleRéfrigérants Installation Service à la clientèle Conseils de dépannageMesures de sécurité Installation des accessoiresService à la clientèle Réarrangement des clayettesClayettes anti-débordements sur certains modèles Installation De dépannageClayette coulissante anti-déversement sur certains modèles Bac à viande transformable sur certains modèlesLes commandes Nécessiter plusieurs ajustementsSécurité La cartouche du filtre à eau. sur certains modèlesMachine à glaçons automatique Mesures dePour utiliser le distributeur Le distributeur d’eau et de glaçons. sur certains modèlesNécessaire de machine à glaçons Verrouillage du distributeurEntretien et nettoyage du réfrigérateur Dégagements Emplacement DU RéfrigérateurAlimentation D’EAU À LA Machine Roulettes DE NivellementAvant DE Commencer CE Dont Vous Aurez BesoinFixez LE Robinet D’ARRÊT Percez UN Trou Pour LE RobinetBranchez LE Tuyau AU Robinet Acheminez LE TuyauFermez L’EAU AU Niveau DU Robinet D’ARRÊT Branchez Votre RéfrigérateurMarche Mesures de sécurité Fonctionnement Installation Bruits normaux de fonctionnementAvant d’appeler un réparateur… Mesures de sécurité FonctionnementLueur orange dans Creux à l’intérieur La porte ne se refermePas entièrement Le congélateurPar temps humide Consultez Remplacement des ampoulesDe la condensation ’ouverture des portesGarantie DU Client Feuillet de données relatives à la performance CarbofuraneService à la clientèle Service de réparationsProlongation de garantie Antes de deshacerse de su viejo refrigerador o congelador Operación InstalaciónServicio al RefrigerantesComo Conectar LA Electricidad OperaciónReubicación de los entrepaños Cómo instalar los accesoriosSeguridad Entrepaños del refrigeradorComo sacar la gaveta preservadora de alimentos SolucionarEntrepaños a prueba de derrames en algunos modelos Contenedor convertible para carnes en algunos modelosPasos de inicio para un correcto control de la temperatura Instalación Servicio al consumidor Solucionar problemasLos controles del refrigerador Necesitar más de un ajusteEl cartucho del filtro de agua. en algunos modelos El dispositivo automático para hacer hieloSolucionar problemas Servicio al consumidorLimpiar el interior Cuidado y limpieza del refrigeradorLimpiar el exterior Atrás del refrigeradorPreparación para vacaciones En caso de mudanzaReemplazo de bombillas Ubicación DEL Refrigerador Espacios LibresRodillos Instrucciones para la instalación Alineación DE LAS PuertasAntes DE Iniciar QUÉ NecesitaInstale LA Válvula DE Cierre BienDirija LA Tubería Lave LA TuberíaConecte LA Tubería AL Refrigerador Conecte EL RefrigeradorInicie LA Máquina DE Hielos Sonidos normales de operación Seguridad Operación InstalaciónAntes de solicitar un servicio… Seguridad OperaciónVea Cuidado y limpieza Los cubos tienen malOlor/sabor La puerta no se cierreAbren las puertas No funciona la luz El refrigerador hueleDel refrigerador InteriorPor el período de GE reemplazará Lo que GE no cubriráEspecificaciones de Operación Garantías ampliadas Servicio al consumidor Página Web de GESolicite una reparación Piezas y accesoriosSchedule Service Consumer Support
Related manuals
Manual 64 pages 49.46 Kb Manual 88 pages 38.63 Kb

20 specifications

The GE 20,22 series engines represent a significant evolution in aviation technology, embodying advancements that enhance efficiency, reliability, and environmental sustainability. As part of General Electric's commitment to innovation in aerospace propulsion, these engines are designed to meet the rigorous demands of modern commercial aviation while minimizing their environmental footprint.

One of the main features of the GE 20,22 engines is their high bypass ratio, which plays an integral role in achieving improved fuel efficiency. By maximizing the amount of air bypassing the engine core, these engines produce more thrust without a proportional increase in fuel consumption. This characteristic makes them ideal for long-haul operations, effectively reducing operating costs for airlines.

The engines also incorporate advanced materials and manufacturing techniques. The use of lightweight composite materials in fan blades and cases contributes to overall weight reduction, enhancing performance without sacrificing durability. Additionally, the integration of advanced ceramic matrix composites (CMCs) in critical components allows for higher operating temperatures, thereby increasing efficiency and reducing emissions.

Technologically, the GE 20,22 series engines are equipped with state-of-the-art digital control systems. These systems provide precise monitoring and adjustments during operation, leading to optimal performance and reduced maintenance requirements. The implementation of real-time data analytics allows for predictive maintenance, enabling operators to anticipate issues before they arise, thereby improving overall reliability.

Noise reduction is another critical characteristic of the GE 20,22 engines. They feature designs and technologies that significantly diminish noise levels during operation, addressing the growing concerns of communities around airports. This commitment to reducing noise, in conjunction with lower emissions, aligns with global efforts to create a more sustainable aviation industry.

Finally, the GE 20,22 engines are compatible with alternative fuels, showcasing General Electric’s forward-thinking approach to sustainability. As the aviation sector moves towards greener solutions, these engines are positioned to use biofuels and synthetic fuels, further decreasing their ecological impact.

In conclusion, the GE 20,22 series engines embody the latest in aerospace technology with their efficiency, reduced emissions, advanced materials, and noise reduction capabilities. Their design not only meets the needs of today’s airlines but also contributes to the industry's path towards a more sustainable future.