Amana W10214254A Temperature and Moisture, Iceand Water, Temperature is too warm

Page 13

Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup.

Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shutoff valve not fully open? Turn the water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture proof packaging to store food.

Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

13

Image 13
Contents Refrigerator User Instructions Refrigerator SafetyUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer LocationRequirements Clean Before UsingElectrical Requirements Water Supply RequirementsReverse Osmosis Water Supply Connect the Water SupplyStyle Style 1 Standard Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalStyle 2 Contoured Door Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Using the Control Adjust the DoorsAdjusting Controls CONDITION/REASON AdjustmentTo Clean Your Refrigerator CleaningRefrigerator Care Ice MakerChanging the Light Bulbs Dry Erase BoardRefrigerator Light Freezer LightRefrigerator Operation TroubleshootingMotor seems to run too much Refrigerator seems noisyTemperature is too warm Temperature and MoistureIceand Water Humid room? Contributes to moisture buildupLimited Warranty Amana Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónAntes de tirar su refrigerador viejo o congelador Requisitos eléctricos Requisitos de ubicaciónRequisitos del suministro de agua Método de conexión a tierra recomendadoSuministro de agua de ósmosis inversa Conexión del suministro de aguaEstilo Estilo 1 Estándar Puertas del refrigeradorEstilo 2 Contorneada Bisagra superior Cómo quitar y volver a poner la puerta en su lugar Uso del control Ajustelas puertasCómo ajustar los controles CONDICIÓN/RAZÓN AjusteLimpieza Fábrica de hieloPara limpiar su refrigerador Cómo cambiar los focos Tablero de borrado en secoLuz del refrigerador Luz del congeladorFuncionamiento delrefrigerador Solución DE ProblemasEl refrigerador no funciona Parece que el motor funciona excesivamenteHielo y agua Temperatura y humedadEs difícil abrir la puerta Hay acumulación de humedad en el interiorExclusiones DE LA Garantía Garantía LimitadaEsta garantía limitada no cubre Exclusión DE Garantías ImplícitasSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage duréfrigérateur Instructions D’INSTALLATIONAvant de jeter votre vieux réfrigérateur ou congélateur Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Spécifications del’alimentationen eauAlimentation en eau par osmose inverse Raccordement de la canalisation d’eauPression de leau Raccordement à une canalisation d’eauPortes du réfrigérateur Achever l’installationDémontage Portes et charnières Inversion des portes facultatifStyle 2 Contour Inversion du sens douverture de la porte option Style 2 Contour Ajustement des commandes Utilisation de la commandeUtilisation DU Réfrigérateur Ajustement desportesMachine à glaçons Entretien DU RéfrigérateurNettoyage Pour nettoyer le réfrigérateurTableau Effaçage à sec Remplacement des ampoules d’éclairageLumière du réfrigérateur Lumière du congélateurFonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéIl y a une accumulation dhumidité à lintérieur Éléments Exclus DE LA Garantie Garantie LimitéeLa présente garantie limitée ne couvre pas W10214254A EN/FR PN W10214129A