Amana W10261420A No waste disposer no air gap, No waste disposer with air gap

Option B, No waste disposer – no air gap

No waste disposer – no air gap

	ScrewLarge-silvertype
	drain clamphose clamp
	Waste tee
	Drain hose
	Drain trap
1 Black end	1. Connect black end of of drain hose to waste
	tee and cut if needed.
	NOTE: Do not cut ribbed section.
2	2. Attach black end of drain hose to waste tee
	with a large silver drain hose clamp (provided).
	Use pliers to squeeze clamp open and move
	into position. If the drain hose was cut use a
	1¹⁄₂” to 2” (3.8 to 5 cm) screw-type clamp (not
	provided).

Option C, Waste disposer – with air gap

Option D, No waste disposer – with air gap

No waste disposer – with air gap

Air gap

Screw-type clamps	Large silver drain
	hose clamp
	(provided)
Waste tee	Rubber hose
	connector
	Drain hose
	Drain trap

1 Black end	1. Connect black end of drain hose to air gap
	and cut if needed.

NOTE: Do not cut ribbed section.

2. Attach drain hose to air gap with large silver

2	drain hose clamp (provided).
	3. Use pliers to squeeze clamp open and move
	into position. If the drain hose was cut, use a
	1¹⁄₂” to 2” (3.8 to 5 cm) screw-type clamp
3	(not provided).
	4. Use a rubber hose (not provided) with

Waste disposer – with air gap

Screw-type clamps

Disposer inlet

Air gap

Large silver drain hose clampl (provided)

Rubber hose connector

Drain hose

screw-type clamps (not provided) to

connect from waste tee to air gap.

Drain trap

1

2

3Black end

4

5

1.Using a hammer and screwdriver, knock plug into disposer.

2.Use needle nose pliers to remove plug.

3.Connect black end of drain hose to air gap and cut if needed.

NOTE: Do not cut ribbed section.

4.Attach drain hose to air gap with large silver drain hose clamp (provided). Use pliers to squeeze clamp open and move into position. If the drain hose was cut, use a 1¹⁄₂” to 2” (3.8 to 5 cm) screw-type clamp (not provided).

5.Use a rubber hose (not provided) with screw-type clamps (not provided) to connect from air gap to disposer inlet.

9