Filling in the water tank of water dispenser
Open the cap of the water tank as illustrated in the figure. Fill in with pure and clean drinking water. Close the cap.
Caution!
•Do not fill water tank with any liquid other than drinking water; beverages such as fruit juice, carbonated fizzy soda drinks, alcoholic drinks are not suitable for use with water dispenser. If such liquids are used, the water dispenser will malfunction and may be damaged beyond repair. The guarantee does not cover such uses.
Some chemical ingredients and additives in such drinks / beverages may also attack and damage water tank material.
•Only use clean pure drinking water.
•Capacity of water dispenser tank is 2.2 litres [3.8 pints], do not overfill.
•Push the water dispenser lever with
a rigid cup. If you are using a plastic disposable cup, then push the lever with your fingers from behind the cup.
Cleaning the water tank Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water, reinstall the top cover mechanism and fasten the latches.
15
EN