5. Grill
You may press “” button to select such functions: (the longest cooking time is 60 minutes).
Pattern 1: 85% grill power, display
Example: cooking food with grill for 20 minutes.
A)Press “” until the LED displayed
B)Set cooking time “20:00”
C)Press “”.
When grilling, the food isn’t heated by microwave, heat is radiated from the metal heater at the top of the oven.
When grill is working, the cooking time has 2 stages, After the 1st half of the cooking, the program will automatically pause and sound 2 beeps, indicating you to open the oven and turn food over, after turning over, close the door, press “” button, the cooking will continue for the 2nd half. If you do not want to turn the food over, the oven will
6. Combination Cooking
This appliance offers you a choice of two methods of combination cooking. Option 1 : (55% Micro + 45% Grill), display
Option 2 : (30% Micro + 70% Grill), display
Example : Cooking food using option 2 for 30 minutes.
a)Press “” button to select
b)Set cooking time for 30 minutes
c)Press “”.
7.Clock
The oven can be used as a clock. Example: To input current time 16:30
A)Press “”, the clock symbol will flash in display. Rotate the “Time setting” knob to set “16:00”.
B)Press “” again, rotate the “Time setting” knob to set “16:30”
C)Press “” again, the clock setting is finished, the time start to go on working.
8. Timer
The timer function helps the microwave oven begin automatic cooking at set time, and automatically stop operation after finishing cooking. (You should set the clock before using timer function). Example: the current time of microwave oven is 16:30, to set cooking at18:15on 70% power for 10 minutes.
A)Press “ ” and set time to18:15 (same procedure as setting clock).
B)Press “” to set 70% power.
C)Input cooking time 10 minutes by rotating the knob “Time Setting”.
D)Press “”.
If you don’t set power and cooking time (omit B and C steps), and directly press ““ button, the microwave oven will work only as a clock, there will be 10 beeps at 18:15, but no other function will run.
9. Child-safety lock
To activate the child safety lock, press “
“ and “” button at the same time for 2 seconds.
Press “” and “” button, at the same time for 2 seconds again, it will unlock this function.
10. Pause/cancel
a)In the course of operation, pressing “ ” button will stop operation.
b)If any program was set before pressing start, pressing this button will cancel all the set program.
12
EN