LG Electronics LRG30355SW manual Tones AT the END of a Timed Cycle, Control Lockout, Cook and Hold

O P E R AT I N G I N S T RU C T I O N S

SPECIAL FEATURES OF YOUR OVEN CONTROL

TONES AT THE END OF A TIMED CYCLE

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual 6-second beep may be cancelled.

To cancel the 6-second beep:

1Touch the BAKE and BROIL

HI/LO pads at the same time for

and 3 seconds until the display shows

SF.

2 Touch the TIMER ON/OFF pad. The display shows CON BEEP (continual beep) and BEEP. Touch the TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

3 Touch the START pad.

CONTROL LOCKOUT

Your control will allow you to lock out the touch pads so they cannot be activated when touched or cleaning the glass panel.

12-HOUR, 24-HOUR, OR CLOCK BLACKOUT

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

1Touch the BAKE and BROIL

HI/LO pads at the same time

and for 3 seconds until the display shows SF.

2 Touch the CLOCK pad once. The display will show 12 hr.

3 If this is the choice you want, touch the START pad.

Touch the CLOCK pad again to change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, touch the START pad.

Touch the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the START pad.

NOTE: If the clock is in the black-out mode, you will not be able to use the DELAY START function.

To lock the controls:

1Touch the 9 and 0 touch pads at the same time for 3 seconds until

and	the control beeps twice. The
	display will show LOC
	continuously and the time of day
	if not blacked out.

NOTE: All cooking and timing functions will be cancelled when locking out the control.

2To unlock the control, touch the

9and 0 touch pads at the same

and	time for 3 seconds until the control
	beeps twice, and LOC will be
	removed from the display.

COOK AND HOLD

Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.

This feature can only be used when timed cooking.

To activate this feature, follow the steps below.

	1	Touch the BAKE and BROIL HI/LO
		pads at the same time for 3
and
		seconds until the display shows SF.
		Touch the COOK TIME pad. The
	2
		display will show Hld OFF.
	3	Touch the COOK TIME pad
		again to activate the feature. The
		display will show Hld ON.

4Touch the START pad to activate the cook and hold feature and leave the control set in this special features mode.

27