Liebherr EWTNes 2956 installation instructions Reversing Door Hinges, Fig.A BGENes

REVERSING DOOR HINGES

The door hinges can be changed from one side to the other if required.

1. Figure 4: Top: Unscrew the hinge pin (2) and remove the screw (5).

2. Swivel out the door at the

top, ensuring that you do not lose the stop (7) and bushing

(8); lift off the door and place it on the floor. Unscrew the handle from the upper door

and pull out the cover caps (A). Then screw the handle on the opposite side of the upper door and place the plugs (Y) in the open screw holes.

3.Center: Pull out the hinge pin (9) with its washer.

4.Swivel out the lower door, lift it out and place it on the floor. Take care not to lose the stop (7) and washers (8). Unscrew the handle from the lower door and pull out the plugs (A). Then screw the handle on the opposite side of the lower door and place the plugs (Y) in the open screw holes.

5.Unscrew all the door fittings (14, 17) and remove plugs (W, X).

5		14	5.
2
1.			X
2.		Y
8		2.
7
3.			A
9			W
4. 7
8			W
		Y
	4.
	17		A
		5.
Fig.A BGENes
			X

Figure 4

A delight in freshness

WF1051 / EWTNes 2956 9