Liebherr EWTNes 2956 installation instructions Spanner

Page 24

SIDE-BY-SIDE INSTALLATION

7.Figure 27: Push the long carriage bolt M5x260 (7) through the leveling wheels as shown. Fit in a washer (8). Screw on the wing nut (9) and tighten it manually. Do not overtighten.

8.Turn the adjustable roller base up. Otherwise you will damage the floor when you push in the appli- ances.

9.Secure the ventilation grille (10) to the appliance with screws (11).

Push in the sealing strip (4) as shown.

10

9.

11

4

4

9	8	7
		7.
		7
		8.

8 spanner

2

3

10 spanner

Figure 27

A delight in freshness

22	WF1051 / EWTNes 2956

Image 24

Contents Installation Instructions Please Read and Follow These Instructions To the Installer Table of Contents Installation Guidelines Cabinet Opening Dimensions Planning InformationWF1051 Figure Side-By-Side WF1051 and RB1400 Figure 130 Planning Information Reversing Door Hinges Fig.A BGENesUnscrew the lower hinge Finally mounting screw M4 Door Opening Angle Figures 7 Fig.D1-2 BGENesInstallation UnpackingSpanner Built-in appliances with a wooden ventilation grille Blocking for Safety Fig.R BGENesDo not install the shut-off valve behind the appliance IcemakerWater Connection Figure Connection to the Water Supply Solenoid valve is located at the rear of your unitIcemaker SIDE-BY-SIDE Installation Installation with SBS Ventilation Grille SetCa.210 Spanner Fig.Q BGENes 31 Connect the appliances Fig.S BGENesSpanner At least 31 square inches 200cm2 per unit SIDE-BY-SIDE Installation