Liebherr EWTNes 2956 installation instructions Spanner

Page 27

SIDE-BY-SIDE INSTALLATION

16.Figure 32: Attach the aligned combination to the surrounding kitchen cabinet. Secure it through the side frames using the screws (20) provided. - Cover the screws with cover caps (21).

17.Now adjust the center adjustable roller bases (22) so that they make slight contact with the floor.

18.Install the lower ventilation grille (23): Secure the ventilation grille so that it touches the floor and adjust it using the slots. Do not overtighten!

20

21

16.

8 spanner

2

3

10 spanner

17.

22

18.

24

24

24

23

24	Fig.U BGENes

Figure 32

A delight in freshness

WF1051 / EWTNes 2956

25

Image 27

Contents Installation Instructions Please Read and Follow These Instructions To the Installer Table of Contents Installation Guidelines Planning Information Cabinet Opening DimensionsWF1051 Figure Side-By-Side WF1051 and RB1400 Figure 130 Planning Information Fig.A BGENes Reversing Door HingesUnscrew the lower hinge Finally mounting screw M4 Fig.D1-2 BGENes Door Opening Angle Figures 7Unpacking InstallationSpanner Built-in appliances with a wooden ventilation grille Fig.R BGENes Blocking for SafetyDo not install the shut-off valve behind the appliance IcemakerWater Connection Figure Solenoid valve is located at the rear of your unit Connection to the Water SupplyIcemaker Installation with SBS Ventilation Grille Set SIDE-BY-SIDE InstallationCa.210 Spanner Fig.Q BGENes Fig.S BGENes 31 Connect the appliancesSpanner At least 31 square inches 200cm2 per unit SIDE-BY-SIDE Installation